Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Step Type)
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052841 REAR BUMPER(for Step Type) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Step Type)  INSTALLATION  


PROCEDURE

Hide 1.INSTALL REAR BUMPER BAR

a.
B277580
0.719,1.333 0.625,1.333 0.625,1.333 0.49,1.646 true 2.448,1.917 2.552,1.917 2.552,1.917 2.771,2.313 true 0.729,1.229 0.99,1.417 0.26,0.188 10 false *1 2.26,1.813 2.448,1.99 0.188,0.177 10 false *1
*1 Temporary Bolt


Temporarily install the 2 temporary bolts to the vehicle body.


b.

Install the rear bumper bar with the 2 bolts, and then tighten the 2 temporary bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)