Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER(for Step Type)
RM1840EF _59 Vehicle Exterior _009657 EXTERIOR PANELS / TRIM _0052841 REAR BUMPER(for Step Type) A

EXTERIOR PANELS / TRIM  REAR BUMPER(for Step Type)  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL REAR BUMPER PLATE LH

a.

Attach the 4 guides to install the rear bumper plate.


b.

Attach the 4 claws.


Hide 2.INSTALL REAR BUMPER PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 3.INSTALL REAR BUMPER PLATE

a.

Attach the 7 guides to install the rear bumper plate.


b.

Attach the 6 claws.


Hide 4.INSTALL REAR BUMPER ARM LH

a.

Install the rear bumper arm with the 2 bolts.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 5.INSTALL REAR BUMPER ARM RH

HINT:

Use the same procedure described for the LH side.