Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) › 2012.04–2012.10
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052656 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) C

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  62-78  DSP Error  


DESCRIPTION

DTC No. Detection Item DTC Detection Condition Trouble Area
62-78 DSP Error An error occurs during the decode process (MP3/WMA). Radio receiver assembly

CAUTION / NOTICE / HINT

NOTICE:
·

These codes may be output even if there is no malfunction.

·

If these codes are output frequently, replace the radio receiver assembly (See page Audio / Visual / Telematics>AUDIO / VIDEO>RADIO RECEIVER>REMOVAL).



HINT:

After the inspection is completed, clear the DTCs.


PROCEDURE

1.CHECK FOR DTC

b.

Check for DTCs and check if the same trouble occurs again.

OK:

Malfunction disappears.



Result:
Proceed to
OK
NG



OK

END (THIS CODE MAY BE OUTPUT EVEN IF THERE IS NO MALFUNCTION)

NG

REPLACE RADIO RECEIVER ASSEMBLY