Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) › from 2013.10
RM1840EF _56 Audio / Visual / Telematics _009631 AUDIO / VIDEO _0052656 AUDIO AND VISUAL SYSTEM(for Radio Receiver Type) J

AUDIO / VIDEO  AUDIO AND VISUAL SYSTEM(for Radio Receiver Type)  Cellular Phone Inspection  


CAUTION / NOTICE / HINT

HINT:

If the operation of a cellular phone or the radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation.


PROCEDURE

1.CHECK USAGE CONDITION
a.

Check that the vehicle and cellular phone meet the following conditions:

NOTICE:

If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.


·

The cellular phone is registered as a hands-free device.

·

"Bluetooth" setting of the cellular phone is on.

·

Operating system and software of the cellular phone are the latest versions.

·

There are no other radio wave emitting devices ("Wi-Fi" communication device, etc.) in the cabin.



b.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.


Result:
Proceed to
The cellular phone is connected correctly
The cellular phone is not connected correctly



The cellular phone is connected correctly

END (USAGE CONDITIONS DEFECTIVE)

The cellular phone is not connected correctly

2.RESTART CELLULAR PHONE
2.RESTART CELLULAR PHONE
a.

Restart the cellular phone.


b.

Turn the ignition switch off.


c.

Turn the ignition switch to ACC.


d.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.


Result:
Proceed to
The cellular phone is connected correctly
The cellular phone is not connected correctly



The cellular phone is connected correctly

END (TEMPORARY MALFUNCTION WITH "Bluetooth" OF CELLULAR PHONE)

The cellular phone is not connected correctly

3.CHECK OPERATION
3.CHECK OPERATION
a.

Check if the in-vehicle device can be recognized by the cellular phone.


Result:
Proceed to
In-vehicle device can be recognized
In-vehicle device can not be recognized



In-vehicle device can be recognized

4.REGISTRATION AGAIN

In-vehicle device can not be recognized

5.CHECK USING ANOTHER VEHICLE
4.REGISTRATION AGAIN
a.

Clear all "Bluetooth" devices registered to the cellular phone and radio receiver assembly.


b.

Register the cellular phone again.


c.

Connect the cellular phone to the in-vehicle device and check that it is connected correctly.


Result:
Proceed to
The cellular phone is connected correctly
The cellular phone is not connected correctly



The cellular phone is connected correctly

END (TEMPORARY MALFUNCTION WITH "Bluetooth")

The cellular phone is not connected correctly

5.CHECK USING ANOTHER VEHICLE
5.CHECK USING ANOTHER VEHICLE
a.

Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.




Result:
Proceed to
The cellular phone is connected correctly
The cellular phone is not connected correctly



The cellular phone is connected correctly

The cellular phone is not connected correctly

6.CHECK USING ANOTHER CELLULAR PHONE
6.CHECK USING ANOTHER CELLULAR PHONE
a.

Check if the system functions normally using another "Bluetooth" compatible cellular phone.

HINT:
·

Make sure to obtain the customer's permission to perform this procedure.

·

After the inspection, clear the registered information and usage history acquired during the inspection.




Result:
Proceed to
The cellular phone is connected correctly
The cellular phone is not connected correctly



The cellular phone is connected correctly

END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED)

The cellular phone is not connected correctly