1.CHECK TRANSFER OIL
Remove the filler plug and gasket.
| *a | 0 to 5 mm |
Check that the oil level is within 5.0 mm (0.196 in.) from the bottom of the filler plug opening.
If the result is not as specified, add transfer oil.
| Transfer Oil Type | Oil grade | Viscosity |
|---|---|---|
| Toyota Genuine Transfer Gear Oil LF or Equivalent | - | SAE 75W |
| Transfer Oil Type | Oil grade | Viscosity |
|---|---|---|
| Gear Oil | GL-4 or GL-5 | SAE 75W-90 |
| Toyota Genuine Transfer Gear Oil LF or Equivalent | - | SAE 75W |
Too much or too little oil will lead to transfer problems.
Except TDV Made:
Since both types of transfer oil are interchangeable, either type may be added to the transfer assembly.
When the oil level is too low, check for oil leakage.
Install a new gasket to the filler plug, and then install the plug.