EMISSION CONTROL SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
The main components of the emission control system are as follows:
| Component | Quantity | Function |
| ECM | 1 | Controls the emission control system based on signals from each sensor. |
| Electric EGR Control Valve Assembly | 1 | Actuated by the ECM via the E-VRV, this valve controls the flow rate of EGR gas. |
| EGR Valve Position Sensor (Built into Electric EGR Control Valve Assembly) | 1 | Detects the EGR valve position. |
| Diesel Throttle Valve | 1 | Actuated by the ECM, this valve controls the flow rate of EGR gas. |
| SYSTEM CONTROL |
EGR System
Based on the signals received from the sensors, the ECM determines the EGR volume via the electric EGR control valve assembly in accordance with the engine condition.
| FUNCTION |
EGR System
This system is designed to help reduce and control NOx formation due to a reduction of peak temperature in the engine combustion chamber, which is accomplished by the introduction of an amount of inert gas into the intake manifold.
| CONSTRUCTION |
Electric EGR Control Valve Assembly
A vacuum actuated type electric EGR control valve assembly is used.
The electric EGR control valve assembly is provided midstream in the intake air passage. By cooling the electric EGR control valve assembly in this manner, a greater volume of exhaust gas can be processed.
An EGR valve position sensor is provided in the electric EGR control valve assembly in order to directly measure the actual amount of the valve opening. This measurement is then input into the ECM in order to improve the precision of EGR control.

| *1 | Electric EGR Control Valve Assembly | *2 | Vacuum Port |
| *3 | EGR Valve | *4 | EGR Valve Position Sensor |
| *a | From Diesel Throttle Body | *b | To Intake Manifold |
| *c | From EGR Pipe Sub-assembly | - | - |
![]() | Intake Air | ![]() | EGR Gas |
| OPERATION |
EGR System
By sensing the engine driving conditions and actual amount of EGR valve opening, the ECM electrically operates the E-VRV (for EGR valve control), which controls the magnitude of vacuum introduced into the diaphragm of the electric EGR control valve assembly. In addition, the ECM controls the diesel throttle valve opening position using the throttle control motor. As a result, the amount of recirculating exhaust gas is regulated. EGR valve opening lift is controlled by modulated negative pressure.

| *1 | Engine | *2 | EGR Passage in Cylinder Head |
| *3 | Exhaust Manifold | *4 | Electric EGR Control Valve Assembly |
| *5 | EGR Valve Position Sensor | *6 | EGR Valve |
| *7 | EGR Pipe Sub-assembly | *8 | Vacuum Damper |
| *9 | Throttle Position Sensor | *10 | Diesel Throttle Valve |
| *11 | Throttle Control Motor | *12 | Vacuum Pump |
| *13 | E-VRV (for EGR Valve Control) | *14 | ECM |
| *15 | Atmospheric Pressure Sensor | *16 | Crank Position Sensor |
| *17 | Accelerator Pedal Position Sensor | *18 | Engine Coolant Temperature Sensor |
| *19 | Turbo Pressure Sensor | *20 | Intake Air Temperature Sensor |
| *21 | Intake Mass Air Flow Meter Sub-assembly | - | - |
![]() | Exhaust Gas | ![]() | Intake Air |