ENGINE UNIT > GENERAL



OUTLINE
  1. The 2TR-FE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.

  2. On this engine, the Variable Valve Timing-intelligent (VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.


SPECIFICATION

No. of Cyls. and Arrangement
4-cylinder, In-line
Valve Mechanism
16-valve DOHC, Chain Drive (with VVT-i)
Combustion Chamber
Pentroof Type
Manifolds
Cross-flow
Fuel System
Sequential Multiport Fuel Injection (SFI)
Ignition System
Direct Ignition System (DIS)
Displacement
2694 cm3 (164.4 cu. in.)
Bore x Stroke
95.0 mm x 95.0 mm (3.74 in. x 3.74 in.)
Compression Ratio
9.6 : 1
Max. Output [SAE-NET]
118 kW @ 5200 rpm
Max. Torque [SAE-NET]
241 N*m @ 3800 rpm
Valve Timing
Intake
Open
0° to 35° BTDC
Closed
64° to 29° ABDC
Exhaust
Open
44° BBDC
Closed
8° ATDC
Spark Plug
Manufacturer
DENSO
Type
K20HR-U11
Plug Gap
1.0 mm to 1.1 mm (0.0394 in. to 0.0433 in.)
Firing Order
1 - 3 - 4 - 2
Research Octane Number
91 or higher
Emission Regulation
EURO 3*2
EURO 2*3
Engine Service Mass (Reference)*1
157 kg (346 lb)

HINT:
*1: Weight shows the figure with oil and coolant fully filled.
*2: Models for Central and South America
*3: Models for Colombia


W103640E01


MAIN FEATURES
  1. This engine has been able to achieve the following performance features through the use of the items listed below:

    1. High performance and fuel economy

    2. Low noise and vibration

    3. Lightweight and compact design

    4. Good serviceability

    5. Clean emissions

      Item
      (1)
      (2)
      (3)
      (4)
      (5)
      Engine Proper
      A cylinder head cover made of plastic is used.
      -
      ○
      ○
      -
      -
      A taper squish shape is used for the combustion chamber.
      ○
      -
      -
      -
      ○
      2 balance shafts are used.
      -
      ○
      -
      -
      -
      The piston skirt is coated with resin.
      ○
      ○
      -
      -
      -
      A No. 1 oil pan made of aluminum alloy is used.
      ○
      ○
      ○
      -
      -
      Valve Mechanism
      Timing chains and chain tensioners are used.
      ○
      -
      ○
      ○
      -
      Valve lash adjuster assemblies are used.
      ○
      ○
      -
      ○
      ○
      Valve rocker arm sub-assemblies are used.
      ○
      -
      -
      -
      ○
      Intake and Exhaust System
      An intake manifold made of plastic is used.
      -
      -
      ○
      -
      -
      A linkless-type throttle body is used.
      -
      -
      ○
      ○
      -
      A Three-Way Catalysts (TWCs) are used.
      -
      -
      -
      -
      ○
      Fuel System
      Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel.
      ○
      -
      -
      -
      ○
      Quick connectors are used to connect the fuel hose with the fuel pipe.
      -
      -
      -
      ○
      -
      Ignition System
      Long-reach type spark plugs are used.
      ○
      -
      -
      -
      -
      Serpentine Belt Drive System
      A serpentine belt drive system is used.
      -
      ○
      ○
      ○
      -
      Engine Control System
      The Electronic Throttle Control System-intelligent (ETCS-i) is used.
      ○
      -
      -
      -
      ○
      The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary.
      ○
      -
      -
      ○
      ○
      The Variable Valve Timing-intelligent (VVT-i) system is used.
      ○
      -
      -
      -
      ○
      An air injection system is used.*
      -
      -
      -
      -
      ○

      1. *: Models compliant with EURO 3 emission regulations