DIFFERENTIAL SYSTEM > GENERAL



OUTLINE
  1. An SD20C type front differential is used on the 4WD models.

  2. A BD20D type rear differential is used.

  3. To suppress wheel spin, a rear differential with Limited Slip Differential (LSD) is used to achieve a high level of traction on the rough and slippery roads on the models with LSD.

  4. A rear differential lock actuator is used on the models with rear differential lock system. In the unlikely event that one of the rear wheels loses grip on a surface on which it is difficult to transmit drive torque (such as sand), the rear differential lock can connect the left and right rear wheels, thus ensuring the drive torque of the other wheel and assisting in freeing the vehicle in emergency situations.

  5. The rear differential lock ECU operates the differential lock shift actuator. This causes the rear differential lock system to switch the rear differential between free and lock in accordance with the operation of the rear differential lock switch.


SPECIFICATION
  1. Front Differential (4WD Models)

    Engine Type
    1GR-FE
    Transmission Type
    A750F
    R150F
    Differential Gear Ratio
    3.583
    ←
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    Drive Pinion No. of Gear Teeth
    12
    ←
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    1.5 Liters (1.5 US qts, 1.3 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    34.6 kg (76.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.


    Engine Type
    1KD-FTV
    Transmission Type
    A340F
    A750F
    R151F
    Differential Gear Ratio
    3.909
    ←
    3.583
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    ←
    Drive Pinion No. of Gear Teeth
    11
    ←
    12
    Ring Gear No. of Gear Teeth
    43
    ←
    ←
    No. of Differential Pinion
    2
    ←
    ←
    Oil Capacity
    1.5 Liters
    (1.5 US qts, 1.3 Imp. qts)
    ←
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    ←
    Oil Grade
    API GL-5
    ←
    ←
    Weight (Reference)*
    34.6 kg (76.3 lb)
    ←
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.


    Engine Type
    2TR-FE
    Transmission Type
    A343F
    R150F
    Differential Gear Ratio
    4.555
    ←
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    Drive Pinion No. of Gear Teeth
    9
    ←
    Ring Gear No. of Gear Teeth
    41
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    1.5 Liters (1.5 US qts, 1.3 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    34.6 kg (76.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.

  2. Rear Differential (TMMIN Made)

    Engine Type
    1GR-FE
    Transmission Type
    A750F
    R150F
    Differential Gear Ratio
    3.583
    ←
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    Drive Pinion No. of Gear Teeth
    12
    ←
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    25.7 kg (56.7 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.


    Engine Type
    1KD-FTV
    Transmission Type
    A340F
    A750F
    R151F
    Differential Gear Ratio
    3.909
    ←
    3.583
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    ←
    Drive Pinion No. of Gear Teeth
    11
    ←
    12
    Ring Gear No. of Gear Teeth
    43
    ←
    ←
    No. of Differential Pinion
    2*2
    4*3
    2
    2
    Oil Capacity
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)*2
    2.9 Liters (3.1 US qts, 2.6 Imp. qts)*3
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    ←
    Oil Grade
    API GL-5
    ←
    ←
    Weight (Reference)*1
    25.7 kg (56.7 lb)*2
    29.6 kg (65.3 lb)*3
    25.7 kg (56.7 lb)
    ←

    HINT:
    *1: The figure shown is the weight of the part without fluid.
    *2: Models without rear differential lock system
    *3: Models with rear differential lock system


    Engine Type
    2KD-FTV High Version
    Transmission Type
    A340E
    R151
    Differential Gear Ratio
    3.909
    ←
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    Drive Pinion No. of Gear Teeth
    11
    ←
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    25.7 kg (56.7 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.

  3. Rear Differential (TASA Made)

    Engine Type
    1GR-FE
    Transmission Type
    A750F
    R150F
    Differential Gear Ratio
    3.583
    ←
    Ring Gear Size
    207.0 mm (8.15 in.)
    ←
    Drive Pinion No. of Gear Teeth
    12
    ←
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    26.0 kg (57.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.


    Engine Type
    1KD-FTV
    Transmission Type
    A340F
    A750F
    R151F
    Differential Gear Ratio
    3.909
    ←
    3.583
    Ring Gear Size
    207.0 mm (8.15 in.)
    ←
    ←
    Drive Pinion No. of Gear Teeth
    11
    ←
    12
    Ring Gear No. of Gear Teeth
    43
    ←
    ←
    No. of Differential Pinion
    2
    ←
    ←
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    ←
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    ←
    Oil Grade
    API GL-5
    ←
    ←
    Weight (Reference)*
    26.0 kg (57.3 lb)
    ←
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.


    Engine Type
    2TR-FE
    Transmission Type
    A343E
    A343F
    Differential Gear Ratio
    4.555
    ←
    Ring Gear Size
    207.0 mm (8.15 in.)*2
    205.0 mm (8.07 in.)*3
    207.0 mm (8.15 in.)
    Drive Pinion No. of Gear Teeth
    9
    ←
    Ring Gear No. of Gear Teeth
    41
    ←
    No. of Differential Pinion
    2*2
    4*3
    2
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)*2
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)*3
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*1
    26.0 kg (57.3 lb)*2
    26.9 kg (59.3 lb)*3
    26.0 kg (57.3 lb)

    HINT:
    *1: The figure shown is the weight of the part without fluid.
    *2: Models for Colombia
    *3: Models for Central and South America


    Engine Type
    2TR-FE
    Transmission Type
    R150
    R150F
    Differential Gear Ratio
    4.100*2
    4.555*3
    4.555
    Ring Gear Size
    207.0 mm (8.15 in.)
    ←
    Drive Pinion No. of Gear Teeth
    10*2
    9*3
    9
    Ring Gear No. of Gear Teeth
    41
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*1
    26.0 kg (57.3 lb)
    ←

    HINT:
    *1: The figure shown is the weight of the part without fluid.
    *2: Models for Central and South America
    *3: Models for Colombia


    Engine Type
    2TR-FBE
    Transmission Type
    A343E
    R151
    Differential Gear Ratio
    4.100
    ←
    Ring Gear Size
    205.0 mm (8.07 in.)
    ←
    Drive Pinion No. of Gear Teeth
    10
    ←
    Ring Gear No. of Gear Teeth
    41
    ←
    No. of Differential Pinion
    4
    ←
    Oil Capacity
    3.4 Liters (3.5 US qts, 3.0 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    26.9 kg (59.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.

  4. Rear Differential (TSAM Made)

    Engine Type
    1KD-FTV
    Transmission Type
    A340F
    R151F
    Differential Gear Ratio
    3.909
    3.583
    Ring Gear Size
    207.0 mm (8.15 in.)
    ←
    Drive Pinion No. of Gear Teeth
    11
    12
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    26.0 kg (57.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.

  5. Rear Differential (TDV Made)

    Engine Type
    1GR-FE
    Transmission Type
    A750E
    A750F
    Differential Gear Ratio
    3.583
    ←
    Ring Gear Size
    207.0 mm (8.15 in.)
    ←
    Drive Pinion No. of Gear Teeth
    12
    ←
    Ring Gear No. of Gear Teeth
    43
    ←
    No. of Differential Pinion
    2
    ←
    Oil Capacity
    2.5 Liters (2.6 US qts, 2.2 Imp. qts)
    ←
    Oil Viscosity
    SAE 85W-90
    ←
    Oil Grade
    API GL-5
    ←
    Weight (Reference)*
    26.0 kg (57.3 lb)
    ←

    HINT:
    *: The figure shown is the weight of the part without fluid.