FUEL SYSTEM > DETAILS



CONSTRUCTION


  1. Fuel Injector Assembly



    1. A 12-hole fuel injector assembly with optimized fuel flow amount is used to improve the atomization of fuel.


      W104389E01


      Text in Illustration 
      *a
      View from A
      -
      -



  2. Fuel Delivery Pipe Sub-assembly

    1. The fuel delivery pipe sub-assembly is made of plastic to reduce weight.

    2. The right and left fuel delivery pipes are connected by a nylon tube.



    3. The pulsation damper is sealed with an O-ring and secured with a holder.


      W104362E01


      Text in Illustration 
      *1
      Holder
      *2
      O-ring
      *3
      Pulsation Damper
      *4
      Fuel Pressure Regulator Assembly
      *5
      Fuel Delivery Pipe Sub-assembly
      *6
      Nylon Tube



  3. Fuel Suction with Pump and Gauge Tube Assembly



    1. A compact fuel suction with pump and gauge tube assembly is used. Its basic components are a fuel pump and a fuel sender gauge assembly.


      W103633E01


      Text in Illustration 
      *1
      Fuel Suction with Pump and Gauge Tube Assembly
      *2
      Fuel Sender Gauge Assembly
      *3
      Fuel Pump
      -
      -