ENGINE UNIT > GENERAL |
| OUTLINE |
The 2TR-FBE engine is an in-line 4-cylinder, 2.7-liter, 16-valve DOHC engine.
On this engine, the Variable Valve Timing-intelligent (VVT-i) system, Electronic Throttle Control System-intelligent (ETCS-i), and air injection system are used. These control functions have been optimized to further improve engine performance and fuel economy, and to reduce exhaust emissions.
The following have been achieved by using alcohol fuel as an alternative to gasoline for environmental friendliness.
| SPECIFICATION |
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ||
| Valve Mechanism | 16-valve DOHC, Chain Drive (with VVT-i) | ||
| Combustion Chamber | Pentroof Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Sequential Multiport Fuel Injection (SFI) | ||
| Ignition System | Direct Ignition System (DIS) | ||
| Displacement | 2694 cm3 (164.4 cu. in.) | ||
| Bore x Stroke | 95.0 mm x 95.0 mm (3.74 in. x 3.74 in.) | ||
| Compression Ratio | 12.0 : 1 | ||
| Max. Output [SAE-NET] | 116 kW @ 5000 rpm*2 120 kW @ 5000 rpm*3 | ||
| Max. Torque [SAE-NET] | 245 N*m @ 3800 rpm | ||
| Valve Timing | Intake | Open | 0° to 45° BTDC |
| Closed | 64° to 19° ATDC | ||
| Exhaust | Open | 44° BTDC | |
| Closed | 8° ATDC | ||
| Spark Plug | Manufacturer | DENSO | |
| Type | FK20HR8-G | ||
| Plug Gap | 0.7 mm to 0.8 mm (0.0276 in. to 0.0315 in.) | ||
| Firing Order | 1 - 3 - 4 - 2 | ||
| Fuel | Alcohol Fuel*4 | ||
| Emission Regulation | BR-LEV | ||
| Engine Service Mass (Reference)*1 | 161 kg (355 lb) | ||

| MAIN FEATURES |
This engine has been able to achieve the following performance features through the use of the items listed below:
High performance and fuel economy
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) | |
| Engine Proper | A cylinder head cover made of plastic is used. | - | ○ | ○ | - | - |
| A taper squish shape is used for the combustion chamber. | ○ | - | - | - | ○ | |
| 2 balance shafts are used. | - | ○ | - | - | - | |
| The piston skirt is coated with resin. | ○ | ○ | - | - | - | |
| A No. 1 oil pan made of aluminum alloy is used. | ○ | ○ | ○ | - | - | |
| Valve Mechanism | Timing chains and chain tensioners are used. | ○ | - | ○ | ○ | - |
| Valve lash adjuster assemblies are used. | ○ | ○ | - | ○ | ○ | |
| Valve rocker arm sub-assemblies are used. | ○ | - | - | - | ○ | |
| Intake and Exhaust System | An intake manifold made of plastic is used. | - | - | ○ | - | - |
| A linkless-type throttle body is used. | - | - | ○ | ○ | - | |
| A Three-Way Catalysts (TWCs) are used. | - | - | - | - | ○ | |
| Fuel System | Long nozzle, 12-hole type fuel injector assemblies are used to improve the atomization of fuel. | ○ | - | - | - | ○ |
| Quick connectors are used to connect the fuel hose with the fuel pipe. | - | - | - | ○ | - | |
| Ignition System | Long-reach type spark plugs are used. | ○ | - | - | - | - |
| Serpentine Belt Drive System | A serpentine belt drive system is used. | - | ○ | ○ | ○ | - |
| Engine Control System | The Electronic Throttle Control System-intelligent (ETCS-i) is used. | ○ | - | - | - | ○ |
| The Direct Ignition System (DIS) makes ignition timing adjustment unnecessary. | ○ | - | - | ○ | ○ | |
| The Variable Valve Timing-intelligent (VVT-i) system is used. | ○ | - | - | - | ○ | |
| An air injection system is used. | - | - | - | - | ○ | |