ECD SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
The main components of the engine control system are as follows:
| Component | Outline | Quantity | Function |
| ECM | 32-bit CPU*1 | 1 | The ECM effects overall control of the engine control system to suit the operating conditions of the engine in accordance with the signals provided by the sensors. |
| Forest 2*2 | |||
| Injector Driver | DC/DC Converter | 1 | The injector driver is used to drive the injector at high speeds. The injector driver has achieved high-speed driving under high fuel pressure conditions through the use of a DC/DC converter that provides a high voltage, quick-charging system. |
| Turbo Pressure Sensor | Semiconductor Silicon Chip Type | 1 | This sensor uses built-in semiconductors to detect the intake manifold pressure. |
| Atmospheric Pressure Sensor | Semiconductor Silicon Chip Type | 1 | This sensor, which is built into the ECM, uses semiconductors to detect the atmospheric pressure. |
| Fuel Pressure Sensor*1 | Semiconductor Strain Gauge Type | 1 | This sensor uses built-in semiconductors to detect the internal pressure of the common-rail. |
| Fuel Pressure Sensor*2 | Semiconductor Strain Gauge Type | 4 | This sensor, which built into the injector assembly, uses built-in semiconductors to detect the internal pressure of the injector assembly. |
| Pressure Discharge Valve | Solenoid Type | 1 | The pressure discharge valve regulates the fuel pressure. |
| Crank Position Sensor | Pick-up Coil Type (Rotor Teeth/36-2) | 1 | This sensor detects the engine speed and performs the cylinder identification. |
| Camshaft Position Sensor | Pick-up Coil Type (Rotor Teeth/5) | 1 | This sensor performs the cylinder identification. |
| Intake Mass Air Flow Meter Sub-assembly | Hot-wire Type | 1 | This sensor uses a built-in hot-wire to directly detect the intake air mass. |
| Intake Air Temperature Sensor (Built into Intake Mass Air Flow Meter Sub-assembly) | Thermistor Type | 1 | This sensor detects the intake air temperature by means of an internal thermistor. |
| Intake Air Temperature Sensor (Intercooler Outlet) | Thermistor Type | 1 | This sensor detects the intake air temperature past the intercooler. |
| Engine Coolant Temperature Sensor | Thermistor Type | 1 | This sensor detects the engine coolant temperature by means of an internal thermistor. |
| Fuel Temperature Sensor*1 | Thermistor Type | 1 | This sensor detects the fuel temperature in the supply pump by means of an internal thermistor. |
| Fuel Temperature Sensor*2 | Thermistor Type | 4 | This sensor detects the fuel temperature in the injector assembly. |
| Throttle Position Sensor | Non-contact Type | 1 | This sensor detects the diesel throttle valve opening angle. |
| Accelerator Pedal Position Sensor | Non-contact Type | 1 | This sensor detects the amount of pedal effort applied to the accelerator pedal. |
| Nozzle Vane Position Sensor | Non-contact Type | 1 | This sensor detects the nozzle vane position. |
| Suction Control Valve (SCV) | Linear Solenoid Valve | 1 | The SCV position is controlled by the signals from the ECM, and a fuel volume that suits the SCV position is drawn into the pumping portion (plunger portion). |
| Glow Plug Controller*2 | Pulse Width Modulation (PWM) Driver | 1 | The glow plug controller controls the length of time for which the current is applied to the glow plug assemblies in accordance with the ECM signal. |
| Injector Assembly | 8-hole, Solenoid Type*1 | 4 | The injector injects the fuel to the combustion chamber in accordance with the ECM signals via the injector driver. |
| 10-hole, Piezo Type*2 |
| SYSTEM CONTROL |
The engine control system has the following features. The ECM controls these systems:
| System | Outline | |
| Fuel Injection Volume Control | Based on the signals received from the sensors, the ECM determines the fuel injection volume in accordance with the engine condition. | |
| Fuel Injection Timing Control | Based on the signals received from the sensors, the ECM determines the fuel injection timing in accordance with the engine condition. | |
| During Starting Control | To facilitate startability, the ECM optimally controls the injection volume and injection timing during starting. | |
| Idle Speed Control | The ECM determines the idle speed in accordance with the engine condition, and controls the fuel injection volume in order to maintain the target idle speed. | |
| Fuel Pressure Control | Based on the signals received from the sensors, the ECM controls fuel pressure using the Suction Control Valve (SCV) and pressure discharge valve in accordance with engine operating conditions. | |
| Pilot Injection Control | Based on the signals received from the sensors, the ECM determines pilot injection volume/timing and interval (between pilot injection and main injection) in accordance with the engine condition. | |
| Glow Plug Control | The ECM sends signals to the glow plug controller in accordance with engine conditions. Based on the signals, the glow plug controller controls the length of time for which the current is applied to the glow plug assemblies in each cylinder.*1 | |
| The ECM controls the length of time for which the current is applied to the glow plug assemblies, in accordance with the engine coolant temperature.*2 | ||
| Diesel Throttle Control |
| |
| Swirl Control | Based on the signals received from the sensors, the ECM controls the vacuum that is directed to the actuator via the VSVs, in order to open and close the valve. Controls the valve opening in 3 stages: fully open, semi-open, and fully closed.*3 | |
| Based on the signals received from the sensors, the ECM controls the vacuum that is directed to the actuator via the VSV, in order to open and close the valve. Controls the valve opening in 2 stages: fully open and fully closed.*4 | ||
| Turbocharger Control | Based on the signals received from the sensors, the ECM controls the actuator in accordance with the engine condition. | |
| i-ART*1 | Fuel injection is precisely controlled and self-diagnosis of the injector assembly is conducted based on signals from the fuel pressure and fuel temperature sensors built into each injector assembly. | |
| Air Conditioning Cut-off Control | By controlling the air conditioning compressor on or off in accordance with the engine condition, driveability is maintained. | |
| Engine Immobiliser | Prohibits fuel injection if an attempt is made to start the engine with an invalid ignition key. | |
| Diagnosis | When the ECM detects a malfunction, it diagnoses and memorizes the failed section. | |
| Fail-safe | When the ECM detects a malfunction, it stops or controls the engine in accordance with the data already stored in the memory. | |
| FUNCTION |
Fuel Injection Volume Control
The ECM calculates 2 types of values: the basic injection volume and the maximum injection volume. Then, the ECM compares the basic and maximum injection volumes, and determines the smaller calculated value to be the final injection volume.



Fuel Injection Timing Control
Fuel injection timing is controlled as shown below:

During Starting Control
The starting injection volume is determined by adjusting the basic injection volume in accordance with the starter on signals (on time), engine coolant temperature sensor signals and engine speed signal. When the engine is cold, the engine coolant temperature will be lower and the injection volume will be greater.

To determine the starting injection timing, the target injection timing is corrected in accordance with the starter signals, engine coolant temperature, and engine speed. When the engine coolant temperature is low, if the engine speed is high, the injection timing is advanced.

Idle Speed Control
Idle speed control correction is controlled as shown below:

Fuel Pressure Control
The ECM calculates the target injection pressure (32 MPa to 200 MPa*1 or 32 MPa to 160 MPa*2) based on the signals from the accelerator pedal position sensor and the crank position sensor. To control fuel pressure, signals sent to the Suction Control Valve (SCV) of the supply pump assembly regulate the suction volume, and signals sent to the pressure discharge valve of the common-rail regulate the discharge volume, so that the pressure detected by the fuel pressure sensor matches the target injection pressure.


Pilot Injection Control
Pilot injection is a method that provides an auxiliary fuel injection before the main fuel injection takes place. The purpose of pilot injection is to gently start the combustion of the fuel of the main injection in order to reduce combustion noise.
| State | Pilot Injection | Ordinary Injection |
| Fuel Injection | ![]() | ![]() |
| Combustion Pressure | ![]() | ![]() |
During pilot injection, the pilot injection volume, timing, and interval (between pilot injection and main injection) are controlled as shown below:

Glow Plug Control
Except on the models compliant with Tier 1.5 emission regulations, the ECM controls the length of time for which the current is applied to the glow plug relay when the engine starts in accordance with engine coolant temperature to control the length of time for which the current is applied to the glow plug assemblies.
On the models compliant with Tier 1.5 emission regulations, the ECM sends a signal to the glow plug controller, and the glow plug controller independently controls the length of time for which the current is applied to the glow plug assemblies in each cylinder in accordance with engine conditions. By independently and precisely controlling the temperature inside each cylinder, low emissions are achieved.
Diesel Throttle Control
The ECM controls the opening of the diesel throttle valve to reduce the noise caused when idling and decelerating, and the noise and vibrations caused when stopping the engine.
Swirl Control
The ECM controls the swirl control valve position to improve torque in the low engine speed range and to optimize exhaust emissions.
Turbocharger Control
The ECM controls the nozzle vane position, in order to obtain the calculated target turbo pressure appropriate to the engine operating conditions.
i-ART (Models Compliant with Tier 1.5 Emission Regulations)
The ECM precisely controls fuel injection based on signals from the fuel pressure and fuel temperature sensors which are built into each injector assembly. In addition, fuel injector assembly malfunctions can be determined by directly detecting the fuel pressure of the each injector assembly.
Closed loop control is used, thus achieving automatic correction of injection characteristics throughout the entire lifespan of the injector assembly.
| CONSTRUCTION |
ECM
On the models compliant with Tier 1.5 emission regulations, the forest 2 type CPU of the ECM is used to increase the speed for processing the signals.
Except on the models compliant with Tier 1.5 emission regulations, the 32-bit CPU of the ECM is used to increase the speed for processing the signals.
On the models with automatic transmission, the ECM maintains communication with a separate, independent TCM through Controller Area Network (CAN). Thus, engine control is effected in coordination with ECT control.
Injector Driver
The injector driver is used to drive the injector at high speeds. The injector driver has achieved high-speed driving under high fuel pressure conditions through the use of a DC/DC converter that provides a high voltage, quick-charging system.
The ECM constantly monitors the injector driver and stops the engine when an abnormal condition is detected.
Turbo Pressure Sensor
The turbo pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it. The sensor converts the intake air pressure into an electrical signal, and sends it to the ECM in an amplified form.

Fuel Pressure Sensor (Except Models Compliant with Tier 1.5 Emission Regulations:)
The fuel pressure sensor, which is mounted on the common-rail, outputs a signal that represents the fuel pressure in the common-rail to the ECM in order to constantly regulate the fuel at an optimal pressure.
The fuel pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it.
The fuel pressure sensor has 2 circuits (main and sub), which enable the ECM to constantly compare the values detected by the 2 circuits. As a result, highly precise values can be detected, which also enables a higher level of fail-safe control.

Fuel Pressure Sensor (Models Compliant with Tier 1.5 Emission Regulations:)
The fuel pressure sensor, which is mounted on the each injector assembly, outputs a signal that represents the fuel pressure in the injector assembly to the ECM in order to constantly regulate the fuel at an optimal pressure.
The fuel pressure sensor consists of a semiconductor which utilizes the characteristics of a silicon chip that changes its electrical resistance when pressure is applied to it.

Pressure Discharge Valve
The pressure discharge valve regulates the fuel pressure. In the pressure discharge valve, the plunger opens and closes in accordance with the actuation signals from the injector driver. Thus, it regulates pressure by releasing excess pressure from the common-rail. In addition, it has a pressure reduction function in case of emergency.

| *A | Models compliant with Tier 1.5 emission regulations | *B | Except models compliant with Tier 1.5 emission regulations |
| *1 | Common-rail Assembly | *2 | Pressure Discharge Valve |
| *3 | Plunger | - | - |
| *a | Pressure Discharge Valve Cross Section | - | - |
![]() | Fuel from Common-rail (High Pressure) | ![]() | Fuel to Fuel Tank (Excess Pressure) |
Crank Position Sensor and Camshaft Position Sensor
The timing rotor of the crankshaft consists of 34 teeth, with 2 teeth missing. The crank position sensor outputs the crankshaft rotation signals every 10°, and the missing teeth are used to determine the top dead center.
To detect the camshaft position, a protrusion that is provided on the timing pulley is used to generate 5 pulses for every 2 revolutions of the crankshaft.

Intake Mass Air Flow Meter Sub-assembly
This engine uses the hot-wire type air flow meter designed for direct electrical measurement of the intake air mass flow.
This intake mass air flow meter sub-assembly has a built-in intake air temperature sensor.

| *1 | Intake Mass Air Flow Meter Sub-assembly | *2 | Platinum Hot-wire Element |
| *3 | Temperature Sensing Element | *4 | Intake Air Temperature Sensor |
| *a | A - A Cross Section | - | - |
![]() | Air Flow | - | - |

| *1 | Intake Mass Air Flow Meter Sub-assembly | *2 | Temperature Sensing Element |
| *3 | Platinum Hot-wire Element | *4 | Intake Air Temperature Sensor |
![]() | Air Flow | - | - |
Throttle Position Sensor
The throttle position sensor is mounted on the diesel throttle body assembly. To detect the opening angle of the diesel throttle valve, the throttle position sensor converts the magnetic flux density, that changes when the magnetic yoke (located on the same axis as the diesel throttle valve shaft) rotates around the Hall IC, into electric signals to operate the throttle control motor.

Accelerator Pedal Position Sensor
The magnetic yoke that is mounted at the base of the accelerator pedal arm moves around the Hall IC in accordance with the amount of effort that is applied to the accelerator pedal. The Hall IC converts the changes in the magnetic flux that occur at that time into electrical signals, and outputs them in the form of accelerator pedal effort to the ECM.

Nozzle Vane Position Sensor
The nozzle vane position sensor consists of a Hall IC and a magnetic yoke that rotates in unison with the movement of the linkage that actuates the nozzle vane. The nozzle vane position sensor converts the changes in the magnetic flux that are caused by the rotation of the DC motor (hence, the rotation of the magnetic yoke) into electric signals, and outputs them to the ECM (via the turbo motor driver*). The ECM determines the actual nozzle vane position from the electric signals in order to calculate the target nozzle vane position.

| OPERATION |
Glow Plug Control
On the models compliant with Tier 1.5 emission regulations, glow plug control carries out the following controls:

Except on the models compliant with Tier 1.5 emission regulations, glow plug control carries out the following controls:

Diesel Throttle Control
The opening of the diesel throttle valve is controlled by the ECM in accordance with the engine conditions. As a result, the noise that is generated during idling and deceleration, as well as the noise and vibrations that are generated when the engine is stopped, have been reduced and this control makes it possible to recirculate the exhaust gas in accordance with the driving conditions.

| *1 | Throttle Position Sensor | *2 | Throttle Control Motor |
| *3 | Diesel Throttle Valve | *4 | ECM |
| *5 | Engine Speed Signal | *6 | Vehicle Speed Signal |
| *7 | Engine Coolant Temperature Signal | *8 | Intake Air Temperature Signal |
| *9 | Accelerator Pedal Position Signal | *10 | Intake Air Pressure Signal |
| *11 | Ignition Signal | - | - |
Swirl Control
On the models compliant with EURO 4 and Tier 1.5 emission regulations, swirl control carries out the following controls:

Except on the models compliant with EURO 4 and Tier 1.5 emission regulations, swirl control carries out the following controls:

Turbocharger Control
On the models compliant with Tier 1.5 emission regulations, turbocharger control carries out the following controls:

Except on the models compliant with Tier 1.5 emission regulations, turbocharger control carries out the following controls:

i-ART (Models Compliant with Tier 1.5 Emission Regulations)
Each injector detects both the fuel pressure under the following conditions and the fuel temperature using its own built-in fuel temperature and fuel pressure sensors. The injector gives these values as feedback to the ECM.
The ECM optimally controls the fuel injection volume based on the feedback values. In addition, fuel injection volume differences between each cylinder are suppressed by directly detecting the injection pressure of each cylinder.
By detecting abnormal levels of fuel pressure under each condition, the ECM also determines the occurrence of abnormalities such as non-injection of the injector assembly, constant injection or fuel leakage.
The injector assembly is provided with an auto-learning function. Learned values are stored by the injector assembly in its own built-in memory IC.

| *1 | ECM | *2 | Injector Driver |
| *3 | Injector Assembly - Fuel Pressure Sensor - Fuel Temperature Sensor - Memory IC | *4 | Fuel Pressure Sensor |
| *5 | Control Chamber | *6 | Nozzle Needle |
| *a | Fuel Injection Request | *b | Operation Signal |
| *c | Fuel Pressure Signal | *d | Each Injector Assembly |
| *e | INJ Communication (Fuel Temperature Signal and Memory IC Communication) | *f | Feedback |
| *g | Command Signal | *h | When there is no injection |
| *i | When electrical current starts to flow | *j | When injection starts |
| *k | When the maximum injection rate has been reached | *l | When electrical current flow has stopped |
| *m | When the injection rate has been reduced | *n | When injection has stopped |
![]() | Nozzle Needle Movement | - | - |