ENGINE UNIT > GENERAL |
| OUTLINE |
The 1KD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 3.0-liter, 16-valve DOHC, turbocharged diesel engine with intercooler. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.
An intercooler is provided. This lowers the intake air temperature and improves power output.
| SPECIFICATION |
| No. of Cyls. and Arrangement | 4-cylinder, In-line | ||
| Valve Mechanism | 16-valve DOHC, Belt and Gear Drive | ||
| Combustion Chamber | Direct Injection Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Common-rail Type | ||
| Displacement | 2982 cm3 (182.0 cu. in.) | ||
| Bore x Stroke | 96.0 mm x 103.0 mm (3.78 in. x 4.06 in.) | ||
| Compression Ratio | 17.9 : 1 | ||
| Max. Output (EEC) | EURO 4 | 126 kW @ 3600 rpm | |
| Except EURO 4 | 120 kW @ 3400 rpm | ||
| Max. Torque (EEC) | EURO 4 | 343 N*m @ 1400 to 3400 rpm | |
| Except EURO 4 | 343 N*m @ 1400 to 3200 rpm | ||
| Valve Timing | Intake | Open | 2° BTDC |
| Closed | 37° ABDC | ||
| Exhaust | Open | 45° BBDC | |
| Closed | 0° ATDC | ||
| Firing Order | 1 - 3 - 4 - 2 | ||
| Fuel Cetane Number | 48 or higher | ||
| Emission Regulation | EURO 4*1 | ||
| EURO 3*2 | |||
| EURO 2*3 | |||
| EURO 1*4 | |||
| Tier 1*5 | |||
| Engine Service Mass*6 | M/T | 261 kg (575 lb) | |
| A/T | 251 kg (553 lb) | ||

| MAIN FEATURES |
This engine has been able to achieve the following performance through the use of the items listed below:
High performance and fuel economy
Low noise and vibration
Lightweight and compact design
Good serviceability
Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) | |
| Engine Proper | A cylinder head cover made of plastic is used. | - | - | ○ | - | - |
| A cylinder head made of aluminum alloy is used. | - | - | ○ | - | - | |
| A piston provided with combustion chamber is used. | ○ | ○ | - | - | ○ | |
| A passage for the EGR is provided in the cylinder head. | - | - | - | - | ○ | |
| 2 balance shafts are used. | - | ○ | - | - | - | |
| Valve Mechanism | An intake camshaft is driven by a timing belt, and an exhaust camshaft is driven by a gear. | - | ○ | ○ | - | - |
| An automatic tensioner is provided for the timing belt. | - | - | - | ○ | - | |
| Cooling System | Toyota Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| Intake and Exhaust System | A diesel throttle valve is used. | ○ | ○ | - | - | ○ |
| A swirl control valve is used. | ○ | ○ | - | - | ○ | |
| A variable nozzle vane type turbocharger is used. | ○ | - | - | - | ○ | |
| An intercooler is used. | ○ | - | - | - | ○ | |
| Fuel System | An HP3 type supply pump is used. | ○ | ○ | ○ | - | - |
| A common-rail type fuel injection system is used. | ○ | ○ | - | - | ○ | |
| An injector is provided in the bore center. | ○ | ○ | - | - | ○ | |
| Compensation values and Quick Response (QR) codes are used. | ○ | ○ | - | - | ○ | |
| A fuel cooler is used. | ○ | - | - | - | - | |
| Serpentine Belt Drive System | A serpentine belt drive system is used. | - | - | - | ○ | - |
| Engine Control System | An intake mass air flow meter is used. | ○ | - | - | - | ○ |
| Non-contact sensors are used as the accelerator pedal position sensor and diesel throttle valve position sensor. | ○ | - | - | - | ○ | |
| A pilot injection control system is used. | - | ○ | - | - | ○ | |
| A swirl control is used. | ○ | - | - | - | - | |
| Emission Control System | An EGR system is used. | - | - | - | - | ○ |
| An EGR cooler with bypass is used.*1 | - | - | - | - | ○ | |
| An oxidation catalyst is used.*2 | - | - | - | - | ○ | |