ENGINE UNIT > GENERAL



OUTLINE
  1. The 1KD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is an in-line 4-cylinder, 3.0-liter, 16-valve DOHC, turbocharged diesel engine with intercooler. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibrations.

  2. 1KD-FTV engine is used on models for Brazil, in which intelligent-Accuracy Refinement Technology (i-ART) is used, thus improving injection volume accuracy and providing a self-diagnosis function for the injector assembly.

  3. An intercooler is provided. This lowers the intake air temperature and improves power output.


SPECIFICATION

No. of Cyls. and Arrangement
4-cylinder, In-line
Valve Mechanism
16-valve DOHC, Belt and Gear Drive
Combustion Chamber
Direct Injection Type
Manifolds
Cross-flow
Fuel System
Common-rail Type
Displacement
2982 cm3 (182.0 cu. in.)
Bore x Stroke
96.0 mm x 103.0 mm (3.78 in. x 4.06 in.)
Compression Ratio
Tier 1.5
15 : 1
Except Tier 1.5
17.9 : 1
Max. Output (EEC)
EURO 4 and Tier 1.5
126 kW @ 3600 rpm
Except EURO 4 and Tier 1.5
120 kW @ 3400 rpm
Max. Torque (EEC)
EURO 4 and Tier 1.5
M/T
343 N*m @ 1400 to 3400 rpm
A/T
360 N*m @ 1400 to 3200 rpm
Except EURO 4 and Tier 1.5
343 N*m @ 1400 to 3200 rpm
Valve Timing
Tier 1.5
Intake
Open
3° BTDC
Closed
28° ABDC
Exhaust
Open
48° BBDC
Closed
0° ATDC
Except Tier 1.5
Intake
Open
2° BTDC
Closed
37° ABDC
Exhaust
Open
45° BBDC
Closed
0° ATDC
Firing Order
1 - 3 - 4 - 2
Fuel Cetane Number
48 or higher
Emission Regulation
EURO 4*1
EURO 3*2
EURO 1*3
Tier 1.5*4
-*5
Engine Service Mass*6
M/T
261 kg (575 lb)
A/T
251 kg (553 lb)

HINT:
  1. *1: TASA made models (except models for Brazil, Peru, high altitude countries and export package) and models for Colombia
  2. *2: Models for Peru and TMMIN made models (except models for Colombia, high altitude countries and export package)
  3. *3: Models for high altitude countries and export package and TSAM made models
  4. *4: Models for Brazil
  5. *5: Models for ASEAN
  6. *6: Weight shows the figure with oil and water fully filled.


W104198E07


MAIN FEATURES
  1. This engine has been able to achieve the following performance through the use of the items listed below:

    1. High performance and fuel economy

    2. Low noise and vibration

    3. Lightweight and compact design

    4. Good serviceability

    5. Clean emissions

      Item
      (1)
      (2)
      (3)
      (4)
      (5)
      Engine Proper
      A cylinder head cover made of plastic is used.
      -
      -
      ○
      -
      -
      A cylinder head made of aluminum alloy is used.
      -
      -
      ○
      -
      -
      A piston provided with combustion chamber is used.
      ○
      ○
      -
      -
      ○
      A passage for the EGR is provided in the cylinder head.
      -
      -
      -
      -
      ○
      2 balance shafts are used.
      -
      ○
      -
      -
      -
      Valve Mechanism
      An intake camshaft is driven by a timing belt, and an exhaust camshaft is driven by a gear.
      -
      ○
      ○
      -
      -
      An automatic tensioner is provided for the timing belt.
      -
      -
      -
      ○
      -
      Cooling System
      Toyota Genuine Super Long Life Coolant (SLLC) is used.
      -
      -
      -
      ○
      -
      Intake and Exhaust System
      A diesel throttle valve is used.
      ○
      ○
      -
      -
      ○
      A swirl control valve is used.
      ○
      ○
      -
      -
      ○
      A variable nozzle vane type turbocharger is used.
      ○
      -
      -
      -
      ○
      An intercooler is used.
      ○
      -
      -
      -
      ○
      Fuel System
      An HP3 type supply pump is used.
      ○
      ○
      ○
      -
      -
      A common-rail type fuel injection system is used.
      ○
      ○
      -
      -
      ○
      An injector is provided in the bore center.
      ○
      ○
      -
      -
      ○
      Compensation values and Quick Response (QR) codes are used.*1
      ○
      ○
      -
      -
      ○
      A fuel cooler is used.
      ○
      -
      -
      -
      -
      Serpentine Belt Drive System
      A serpentine belt drive system is used.
      -
      -
      -
      ○
      -
      Engine Control System
      An intake mass air flow meter is used.
      ○
      -
      -
      -
      ○
      Non-contact sensors are used as the accelerator pedal position sensor and diesel throttle valve position sensor.
      ○
      -
      -
      -
      ○
      A pilot injection control system is used.
      -
      ○
      -
      -
      ○
      A swirl control is used.
      ○
      -
      -
      -
      -
      Emission Control System
      An EGR system is used.*2
      -
      -
      -
      -
      ○
      An EGR cooler with bypass is used.*3
      -
      -
      -
      -
      ○
      An oxidation catalyst is used.*4
      -
      -
      -
      -
      ○

      1. *1: Except models compliant with Tier 1.5 emission regulations
      2. *2: Except models non-compliant with emission regulations
      3. *3: Models compliant with EURO 4 and Tier 1.5 emission regulations
      4. *4: Models compliant with EURO 4, EURO 3 and Tier 1.5 emission regulations and models for high altitude countries