FUEL SYSTEM > GENERAL |
| OUTLINE |
A common-rail system is used in the fuel injection system.
An HP3 type supply pump, which is compact and lightweight, is used.
On the models compliant with Tier 1.5 emission regulations, piezo type injector assemblies are used.
Except on the models compliant with Tier 1.5 emission regulations, solenoid type injector assemblies are used.
Except on the models compliant with Tier 1.5 emission regulations, an injector compensation value and a Quick Response (QR) code are printed on the injector to achieve high-precision control.
A fuel filter assembly, in which the fuel filter element alone can be replaced, is used.
A fuel filter warning switch, which turns on or off when the internal vacuum of the filter increases, is provided in the fuel filter assembly.
A fuel cooler made of aluminum is used.
A fuel tank made of single-layer plastic is used.
On the models compliant with Tier 1.5 emission regulations, a 2nd fuel filter is used.
On the models compliant with EURO 4 emission regulations, a recirculation type fuel heater is used.