MONITOR SYSTEM > DETAILS |
| FUNCTION OF MAIN COMPONENTS |
| Component | Function |
| Radio and Display Receiver Assembly*1 | Displays the image transmitted by the rear television camera assembly on the screen. |
| Display and Navigation Module Display*2 | |
| Rear Television Camera Assembly | Captures images in rear of the vehicle and outputs visual signals to the audio head unit. |
| Park/Neutral Position Switch Assembly*3 | Transmits the shift position signal to the ECM. |
| Back-up Light Switch Assembly*4 | Transmits the on/off signal of the back-up light switch assembly to the ECM. |
| Driver Side Junction Block Assembly - No. 1 Integration Relay | Outputs the back door courtesy switch signal to the audio head unit. |
| ECM | Transmits the vehicle signal to the audio head unit. |
| Back Door Lock Assembly - Back Door Courtesy Switch | Detects whether the back door is opened or closed. |
| OPERATING CONDITION |
Monitor system operates the following conditions are met:
| FUNCTION |
Area Displayed on Screen
Rear Television Camera Assembly

| CONSTRUCTION |
Rear Television Camera Assembly
The rear television camera assembly consists of a wide-angle lens and a Charge Coupled Device (CCD).
An image captured by the rear view television camera lens is converted into electrical signals according to the light intensity by using the CCD image element, and the signals are then output to the radio and display receiver assembly.
The image output from the rear television camera assembly is reversed to match the rear view seen from the inside rear view mirror. Therefore, the view actually seen is displayed on the screen in the horizontal reverse.

| *1 | Wide-angle Lens | *2 | Rear Television Camera Assembly |
| DIAGNOSIS |
The monitor system is equipped with a diagnosis function which can display the diagnosis menus. For details, refer to the corresponding Repair Manual for this model.