MONITOR SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS

Component
Function
Rear Television Camera Assembly
Transmits a video signal representing the area behind the vehicle to the radio and display receiver assembly*1 or navigation module display*2.
Radio and Display Receiver Assembly*1
  1. Receives signals from the park/neutral position switch assembly and turns the rear television camera assembly on and off.
  2. Displays the image transmitted by the rear television camera assembly on the screen.
Display and Navigation Module Display*2
Park/Neutral Position Switch Assembly
Sends a shift R position signal to the radio and display receiver assembly*1 or navigation module display*2.
  1. *1: Models with display audio system
  2. *2: Models with navigation system

OPERATING CONDITION
  1. This system operates when both the following conditions have been met:

    1. The ignition switch is ON.
    2. The shift lever is in R.


FUNCTION


  1. Area Displayed on Screen

    1. Objects on the right of the vehicle appear on the right side of the display panel, and objects on the left of the vehicle appear on the left side of the display panel.



    2. The rear television camera assembly uses a wide-angle lens. The perceived distance from images that appear on the screen differs from the actual distance.


      Y131249E01


      Text in Illustration 
      *a
      The illustrations shown are examples only. The illustrations may differ from the actual vehicle screens.
      -
      -

      HINT:
      1. The area displayed on the screen may vary in accordance with vehicle status or road conditions.
      2. The area covered by the rear television camera assembly is limited. The rear television camera assembly does not show objects close to either corner of the bumper or show the area under the bumper.

  2. Warning Message

    1. A warning message appears at the bottom of the screen under the following conditions.

      Message Appearing at Bottom of Screen 
      Warning Message
      Condition
      Check surroundings for safety.
      This message always appears during system operation.


CONSTRUCTION


  1. Rear Television Camera Assembly



    1. The rear television camera assembly consists of a wide-angle lens and a Complementary Metal Oxide Semiconductor (CMOS).


      Y110591E01


      Text in Illustration 
      *1
      Wide-angle Lens
      *2
      Rear Television Camera Assembly


FAIL-SAFE
  1. The table below indicates fail-safe operation when a malfunction is detected:

    Malfunctioning Part
    Detection Item
    Function
    Rear Television Camera Assembly
    Rear television camera assembly malfunction signal is detected.
    System stops signal reception and displays a dark screen.