CLUTCH SYSTEM > GENERAL |
| OUTLINE |
A dry type single plate clutch, operated by hydraulic pressure, is used, which is matched to the performance of each engine.
A clutch disc assembly that uses an organic solvent-free material is used to help protect the environment. In addition, the components of the clutch damper have been optimized to achieve wear resistance and reduce noise and vibration.
A turnover mechanism is used to reduce clutch pedal effort on the models with 1GR-FE or 1KD-FTV engine.
A clutch accumulator assembly is used to reduce the noise and vibrations that are transmitted to the clutch pedal on the models with 1GR-FE or 1KD-FTV engine.
| SPECIFICATION |
| Engine Type | 2TR-FE | 2TR-FBE | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 250 mm (9.84 in.) | ← |
| Installed Load | 5690 N | 5900 N | |
| Clutch Disc | Facing Size* | 250 mm x 160 mm (9.84 in. x 6.30 in.) | ← |
| Master Cylinder | Type | Plunger | ← |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Conventional | ← | |
| Clutch Accumulator | Without | ← | |
| Engine Type | 1GR-FE | 1KD-FTV | |
| Clutch | Type | Dry Type Single Plate Clutch Diaphragm Spring | ← |
| Operation | Hydraulic | ← | |
| Clutch Cover | Size | 275 mm (10.83 in.) | 260 mm (10.24 in.) |
| Installed Load | 7350 N | 6700 N | |
| Clutch Disc | Facing Size* | 275 mm x 175 mm (10.83 in. x 6.89 in.) | 260 mm x 172 mm (10.24 in. x 6.77 in.) |
| Master Cylinder | Type | Conventional | ← |
| Release Cylinder | Type | Non-adjustable | ← |
| Clutch Pedal | Turnover | ← | |
| Clutch Accumulator | With | ← | |