NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS

Component
Function
Display and Navigation Module Display
Receives and processes the data that is input from various components, displays various pieces of information and operating conditions on the screen, and provides voice guidance.
Navigation Antenna Assembly
Receives signals from the GPS satellites and transmits them to the display and navigation module display.
Park/Neutral Position Switch Assembly
Transmits the R position signal to the display and navigation module display.
Steering Pad Switch Assembly
Enables the driver to operate the navigation system from the steering pad switches.
Amplifier Microphone Assembly
Transmits voice signals to the display and navigation module assembly.
Rear Television Camera Assembly
Captures the view behind the vehicle and transmits the image to the display and navigation module display.

FUNCTION
  1. The main functions of the navigation system are shown below:

    Function
    Outline
    Navigation Screen
    Through the use of the GPS and map data which is stored on an SD, the navigation system analyzes the position of the vehicle and indicates that position on the map displayed on this screen.
    Maintenance Information
    Replacement notifications can be given for the following consumable items based on the distance traveled and the duration of usage:
    1. Engine oil: Replace engine oil
    2. Oil filter: Replace engine oil filter
    3. Rotation: Rotate tires
    4. Tire: Replace tires
    5. Brake pad: Replace brake linings
    6. V-belt: Replace V-ribbed belt
    7. LLC: Replace engine coolant
    8. Brake oil: Replace brake fluid
    9. Trans. Fluid: Replace ATF
    10. Air filter: Replace air filter
    11. Personal: New information items can be created separately from provided ones.
    Screen Adjustment
    1. The brightness or contrast of the screen can be adjusted to suit the brightness of surroundings.
    2. When the taillights are turned on, the user can select whether to display the map in the day mode or night mode.
    Personal Function
    Frequently used functions can be operated using shortcuts on the map without entering the menu screen. Operations which are used often can also be customized.
    Eco Manager
    1. Eco Gauge: The user can check ecology-driving on the eco gauge screen.
    2. Eco Score: The user can display the eco score evaluated based on the vehicle speed and eco gauge.
    3. History: The user can display the past 9 cases that have been reset and the most recent eco score history.
    4. Reset: The user can reset eco gauge and eco score.
    5. Eco Prize: Various animal figures can be obtained in accordance with the level of the user's ecology-driving.
    System Settings
    Change Language
    The user can switch the language for the menu screen, each message display and some voice guidances.
    Time Setting
    The time display format (12-hour clock or 24-hour clock) and the daylight saving time can be set.
    Bluetooth Setting
    1. Register Device: Register a Bluetooth device for Bluetooth connection on the navigation system.
    2. Connection: When two or more cellular phones for Bluetooth connection are registered, you can manually switch the cellular phone to be used. The user can also delete a registered cellular phone.
    3. Navigation Name: The user can change the navigation name shown on the Bluetooth device.
    4. Passkey: The user can change the passkey of the navigation system.
    5. Bluetooth On/Off: The user can turn on or off the Bluetooth.
    Restore Defaults
    The user can reset the function settings to the default settings.
    Navigation Function Settings
    1. Change Map Color: The map color can be set to Automatic or Day.
    2. Road Color: The road color can be set to red or blue.
    3. Rodizio Display: Rodizio display on the map can be turned on or off.
    4. Track Log Auto Delete: Automatic deletion of travel routes can be turned on or off.
    5. Display Track Log: Travel route display on the screen can be turned on or off.
    6. 2D View-locked Scrolling: The 2D view-locked scrolling can be selected on or off.
    7. Current Location Info: The present location can be displayed as a street name or as coordinates.
    8. Route Options: Recommended, Short or Main Road can be selected for route search.
    9. Use Toll Route: Standard or Avoid can be selected for route search.
    10. Use Ferry Route: Standard or Avoid can be selected for route search.
    11. Use Freeway Route: Standard or Avoid can be selected for route search.
    12. Traffic Restrictions: Route search with traffic restrictions (time restrictions) can be turned on or off.
    13. Learned Route: Route searching which takes previously-driven routes into consideration can be turned on or off.
    14. Distance and ETA: Destination or waypoint can be selected for the distance and ETA display.
    15. Minor Ordinary Road: 20 km/h, 30 km/h, 40 km/h, 60 km/h, 80 km/h, 10 mph, 20 mph, 25 mph, 40 mph or 50 mph is selectable as an average traveling speed to calculate the ETA.
    16. Major Ordinary Road: 40 km/h, 60 km/h, 80 km/h, 100 km/h, 120 km/h 25 mph, 40 mph, 50 mph, 60 mph or 75 mph is selectable as an average traveling speed to calculate the ETA.
    17. Freeway: 60 km/h, 80 km/h, 100 km/h, 120 km/h, 140 km/h, 40 mph, 50 mph, 60 mph, 75 mph or 90 mph is selectable as an average traveling speed to calculate the ETA.
    18. km/mile: km, mile or mile and yard is selectable for the distance display.
    19. Close Up View: The close up view screen can be turned on or off.
    20. AV Guide Mode: AV guide mode can be turned on or off.
    21. Rodizio Alert: Notifications for routes passing through Rodizio can be set to display or not display when the navigation system starts.
    Volume/Position Setting
    Volume/Mute Settings
    The following volume settings are available:
    1. Voice: The user can select talking volume.
    2. Guidance: The user can adjust the volume of the voice guidance of the audio system.
    3. Ringtone: The user can select ring tone volume.
    4. Beep: The user can select whether to turn the beep sound on or off.
    The following mute settings are available:
    1. Mute Timing: The timing of the audio volume reduction can be selected.
    2. Mute Level: The level of the audio volume reduction can be selected.
    Guide/Hands-free SP Setting: The voice guidance output speaker can be selected.
    Correct Current Position
    The user can correct the deviation of the vehicle position.
    Location Fix
    The user can correct to either local roads or toll roads on the screen.
    Audio Settings
    The user can customize the audio sound and function as desired.
    Quick Setup
    The user can set up the basic settings by following the instructions on the screen.
    Edit Navi Data
    Edit Favorite
    1. Edit: The user can edit the registered information.
    2. Delete: The user can delete the registered location.
    3. Delete All: The user can deletes all the registered locations.
    Delete Search History
    The user can delete the search history.
    Delete Learned Routes
    The user can delete the learned routes.
    Delete Track Log
    The user can delete the track log.

  2. Navigation Screen Function

    1. The navigation screen consists of the following functions:

      Item
      Function
      Map Display
      Current Position
      Displays the current position first, when the navigation system starts.
      Moving (Scrolling) Map
      Moves the map to the user's desired location.
      Switching Map Orientation
      Switches the screen between 2D and 3D views.
      Map Display Method
      Changes the map display method in accordance with to the different situations.
      Street View
      Displays different modes on a screen that is split into 2 views.
      One-way Street Display
      Displays the one-way street mark.
      Changing Map Scale
      Changes the map scale between 10 m and 2000 km.
      Text Zoom
      Zooms in the text of names of locations and POIs displayed on the map screen.
      Registering Scale
      Scales for each map in accordance with to the display method. The registered scale is the display on the map screen when MAP button is pressed.
      Setting Logo Display
      Displays logos of various POIs on the map.
      Destination Search
      By Address
      Enters the destination address to search for the destination.
      By Home
      Searches for the route to your home.
      By Favorites
      Selects the destination from the locations to search to the destination.
      By History
      Selects the destination from the locations searched in the past to search for the destination.
      By Name
      Enters the destination name to search for the destination.
      By Near Here
      Specifies the category of POIs around the current location to search for the destination.
      By Near Dest.
      Specifies the category of POIs around the destination to search for the destination.
      By Near City
      Specifies the city and then the category of POIs around the city to search for the destination.
      By Coordinates
      Specifies the longitude and latitude to search for the destination.
      Route Guidance
      Multiple Destination Setting
      Sets multiple destinations:
      1. Adding waypoint: Enables a waypoint to be added along the route and guidance for a route which passes through it to be received.
      2. Adding destination: Enables a new destination to be added before and after the destination that is set.
      3. Reordering destination: Enables the reordering of the arrival order of the multiple destinations that are set.
      4. Deleting destination: Enables the deletion of a destination.
      Road Preference
      Determines whether to approve the use of the following items on the way to the destination:
      1. Route display
      2. Route search condition/criteria display
      3. Distance
      4. Travel time
      Distance to Destination and Expected Time of Arrival
      Displays the distance to the destination and the ETA on the screen.
      Approaching Intersection
      Displays the guidance screen of the intersection.
      Approaching Motorway Exit or Junction
      Displays the guidance screen of the motorway exit or junction.
      Voice Guidance
      During the route guidance, voice guidance is provided to suit the conditions:
      1. Continue driving straight guidance
      2. Right/left turn guidance
      3. U-turn guidance
      4. Road branching guidance
      5. Destination approach/arrival guidance and so on
      Editing Route
      The user can edit a route including confirming the set route and specifying a waypoint.


DIAGNOSIS
  1. For details on the procedure required to enter the service menu screen, refer to the corresponding Repair Manual for this model.