NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM > DETAILS



FUNCTION OF MAIN COMPONENTS

Component
Function
Display and Navigation Module Display
Receives and processes the data that is input from various components, displays various pieces of information and operating conditions on the screen, and provides voice guidance.
Navigation Antenna Assembly
Receives signals from GPS satellites and transmits them to the navigation receiver assembly.
Combination Meter Assembly
Transmits vehicle speed signals to the navigation receiver assembly.
Steering Pad Switch Assembly
Enables the driver to operate the navigation system from the steering pad switches.
Telephone Microphone Assembly
Transmits voice signals to the display and navigation module assembly.
Park/Neutral Position Switch Assembly
Transmits the R position signals to the display and navigation module display.
Rear Television Camera Assembly
Captures the view behind the vehicle and transmits the image to the display and navigation module display.
No. 1 Stereo Jack Adapter Assembly
Transmits information about the portable audio/video player connected to the USB port or AUX port to the display and navigation module display.

FUNCTION
  1. Navigation Screen

    1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:

      1. Map data in the micro SD card
      2. Global Positioning System (GPS) satellites
      3. Built-in gyro sensor
      4. Vehicle speed signal
      5. Reverse signal
      6. Parking brake signal

      Item
      Function
      Map Display
      Current Position
      Displays the current position when the navigation system starts.
      Moving (Scrolling) Map
      Moves the map to the user's desired location.
      Switching Map Orientation
      Switches the screen between 2D and 3D views.
      Street View
      Displays different modes on a screen that is split into 2 views.
      One-way Street Display
      Displays the one-way street mark.
      Changing Map Scale
      Changes the map scale between 10 m and 2000 km.
      Text Zoom
      Zooms in on the text of location names and POIs displayed on the map screen.
      Registering Scale
      Scales for each map in accordance with the display method. The registered scale is displayed on the map screen when the MAP button is pressed.
      Setting Logo Display
      Displays logos of various POIs on the map.
      Destination Search
      By Map
      Destinations can be found on the map.
      By Address
      Searches for the destination by using the destination address entered.
      By Home
      Searches for a route to the user's home.
      By Favorites
      Selects the destination from the locations to search for the destination.
      By History
      Selects the destination from the locations searched in the past to search for the destination.
      By Name
      Searches for the destination by using the destination name entered.
      By Near Here
      Specifies the category of POIs around the current location to search for the destination.
      By Near Destination
      Specifies the category of POIs around the destination to search for the destination.
      By Near City
      Specifies the city, and then the category of POIs around the city to search for the destination.
      By Coordinates
      Specifies the longitude and latitude to search for the destination.
      By Special Favorites
      If the user has special favorites already registered, the destination can be found by specifying one of the favorites.
      By Telephone Number
      The user can find the destination by telephone number.
      By Postcode
      If postal codes are used in your country, you can search for your destination by first entering its post code.
      Route Guidance
      Multiple Destination Setting
      Sets multiple destinations:
      1. Adding waypoint: A waypoint can be added to the route and used during route guidance.
      2. Adding destination: A new destination can be added before or after the currently set destination(s).
      3. Reordering destination: The arrival order of the multiple destinations that are set can be changed.
      4. Deleting destination: A destination can be deleted.
      Road Preference
      The user can choose whether the system uses the following items on the way to the destination:
      1. Route display
      2. Route search condition/criteria display
      3. Distance
      4. Travel time
      Approaching Intersection
      Displays the guidance screen of the intersection.
      Approaching Motorway Exit or Junction
      Displays the guidance screen of the motorway exit or junction.
      Approaching a Roundabout
      When the user approaches a roundabout on the route, the roundabout guidance appears on the right pane.
      Voice Guidance
      During route guidance, the following types of voice guidance are provided:
      1. Continue driving straight guidance
      2. Right/left turn guidance
      3. U-turn guidance
      4. Road branching guidance
      5. Destination approach/arrival guidance and so on
      Editing Route
      The user can edit a route by confirming the set route, specifying waypoints, etc.

  2. Information Screen

    1. The functions of the information screen display are listed below:

      Function
      Outline
      Maintenance Information
      Item setting: Replacement notifications can be given for the following consumable items based on the distance traveled and the duration of usage:
      1. Engine oil: Replace engine oil
      2. Oil filter: Replace engine oil filter
      3. Rotation: Rotate tires
      4. Tires: Replace tires
      5. Brake pad: Replace brake linings
      6. V-belt: Replace V-ribbed belt
      7. Coolant: Replace engine coolant
      8. Brake oil: Replace brake fluid
      9. Trans. Fluid: Replace ATF
      10. Air filter: Replace air filter
      11. Optional entry: New information items can be created separately from provided ones.
      Customization: The setting to automatically notify the replacement time is already set and all the settings can be deleted or updated.


DIAGNOSIS
  1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.