Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Disc cannot be Inserted or is Ejected Right After Insertion


INSPECTION PROCEDURE

1.CHECK IF A PROPER DISC IS INSERTED
  1. Make sure that the disc is an audio disc or a disc with an MP3, WMA or AAC file, and that it is not deformed, flawed, stained, deteriorated or otherwise defective.

    OK:
    Normal disc.

    HINT:
    1. Translucent or uniquely-shaped CDs cannot be played.
    2. CDs and DVDs with adhesive paper labels should not be played.
    3. Commercial audio CDs and DVDs can be played.
    4. CD-DA files on CD-ROMs, CD-Rs and CD-RWs can be played.
    5. For details on playable CDs and DVDs, refer to the Owner's Manual.



NG
CHANGE DISC
OK


2.CHECK THAT DISC IS INSERTED PROPERLY
  1. Check whether or not the disc is inserted upside down.

    OK:
    Disc is properly inserted.



NG
INSERT DISC PROPERLY
OK


3.CLEAN DISC AND RECHECK


    I100151
  1. Clean the disc by wiping it clean with a soft cloth from the inside to the outside in a radial direction.

    OK:
    Malfunction disappears.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
Go to step 4
OK

END (DISC IS DIRTY) 

4.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one.

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END (DISC IS DEFECTIVE)