Home
›
BODY ELECTRICAL
›
AUDIO / VISUAL
›
AUDIO AND VISUAL SYSTEM (for Radio and Display Type)
AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Pressing Power Switch does not Turn on System
for Preparation
Click here
INSPECTION PROCEDURE
HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.
1.CHECK VEHICLE CONDITION
Check that conditions in the cabin are not likely to cause condensation.
HINT:
This problem occurs if the cabin is humid and the temperature changes rapidly. This may produce condensation, resulting in a short circuit.
OK:
Condensation is not likely being produced.
NG
DRY OUT CABIN AND RECHECK CONDITION
OK
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (
Click here
)