Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc



NG
CHANGE DISC
OK


2.CHECK DISC


    I100151
  1. Check the disc.

    OK:
    The disc is clean.

    HINT:
    If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or anti-static preservative.



NG
CLEAN DISC
OK


3.CHECK OPERATION
  1. Check if the problem recurs using another disc.

    OK:
    The problem does not occur.



NG
Go to step 4
OK

END 

4.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that the radio and display receiver assembly is properly installed (Click here).

    OK:
    Radio and display receiver assembly is properly installed.



NG
REINSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY PROPERLY
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)