Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > CD/DVD Sound Skips


INSPECTION PROCEDURE

1.CHECK DISC


    I100152
  1. Check that the disc is not deformed or cracked.

    OK:
    No deformation or cracks on the disc.



NG
CHANGE DISC
OK


2.CLEAN DISC AND RECHECK


    I100151
  1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.

    OK:
    Malfunction disappears.



NG
Go to step 3
OK

END (DISC IS DIRTY) 

3.REPLACE DISC AND RECHECK
  1. Replace the disc with a known good one.

  1. Check that the malfunction disappears.

    OK:
    Malfunction disappears.



NG
Go to step 4
OK

END (DISC IS DEFECTIVE) 

4.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      Navigation receiver assembly is properly installed.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

REINSTALL NAVIGATION RECEIVER ASSEMBLY