CRUISE CONTROL SYSTEM > TERMINALS OF ECU |
| CHECK ECM (for 1GR-FE) |

Disconnect the E14, E15 and E17 ECM connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E14-3 (BATT) - E17-1 (E1) | L - BR | Battery | Always | 11 to 14 V |
| E14-9 (IGSW) - E17-1 (E1) | B-O - BR | IG power supply | Ignition switch ON | 11 to 14 V |
| E14-9 (IGSW) - E17-1 (E1) | B-O - BR | IG power supply | Ignition switch off | Below 1 V |
| E17-1 (E1) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| E15-28 (E2) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
Reconnect the E14, E15 and E17 ECM connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E14-15 (STP) - E17-1 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal released | Below 1 V |
| E14-15 (STP) - E17-1 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal depressed | 11 to 14 V |
| E14-16 (ST1-) - E17-1 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal depressed | Below 1 V |
| E14-16 (ST1-) - E17-1 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal released | 11 to 14 V |
| E13-2 (CCS) - E17-1 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON | 11 to 14 V |
| E13-2 (CCS) - E17-1 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON CANCEL switch held on | 6.6 to 10.1 V |
| E13-2 (CCS) - E17-1 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON -SET switch held on | 4.5 to 7.1 V |
| E13-2 (CCS) - E17-1 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON +RES switch held on | 2.3 to 4.0 V |
| E13-2 (CCS) - E17-1 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON Main switch on | Below 1 V |
| E13-18 (PI) - E17-1 (E1) | L-B - BR | Cruise main indicator light input signal | Ignition switch ON Main switch on | Below 1 V |
| E13-18 (PI) - E17-1 (E1) | L-B - BR | Cruise control main switch signal | Ignition switch ON Main switch off | 11 to 14 V |
| E14-23 (TC) - E17-1 (E1) | P-B - BR | Terminal TC of DLC3 | Ignition switch ON | 9 to 14 V |
| CHECK ECM (for 1KD-FTV, except i-ART) |

Disconnect the E4, E5, E6 and E7 ECM connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E5-2 (BATT) - E6-7 (E1) | L - BR | Battery | Always | 11 to 14 V |
| E4-9 (IGSW) - E6-7 (E1) | B-O - BR | IG power supply | Ignition switch ON | 11 to 14 V |
| E4-9 (IGSW) - E6-7 (E1) | B-O - BR | IG power supply | Ignition switch off | Below 1 V |
| E6-7 (E1) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
| E7-28 (E2) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
Reconnect the E4, E5, E6 and E7 ECM connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E5-15 (STP) - E6-7 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal released | Below 1 V |
| E5-15 (STP) - E6-7 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal depressed | 11 to 14 V |
| E5-14 (ST1-) - E6-7 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal depressed | Below 1 V |
| E5-14 (ST1-) - E6-7 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal released | 11 to 14 V |
| E4-21 (CCS) - E6-7 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON | 11 to 14 V |
| E4-21 (CCS) - E6-7 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON CANCEL switch held on | 6.6 to 10.1 V |
| E4-21 (CCS) - E6-7 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON -SET switch held on | 4.5 to 7.1 V |
| E4-21 (CCS) - E6-7 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON +RES switch held on | 2.3 to 4.0 V |
| E4-21 (CCS) - E6-7 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON Main switch on | Below 1 V |
| E5-3 (PI) - E6-7 (E1) | L-B - BR | Cruise main indicator light input signal | Ignition switch ON Main switch on | Below 1 V |
| E5-3 (PI) - E6-7 (E1) | L-B - BR | Cruise control main switch signal | Ignition switch ON Main switch off | 11 to 14 V |
| E4-11 (TC) - E6-7 (E1) | P-B - BR | Terminal TC of DLC3 | Ignition switch ON | 9 to 14 V |
| CHECK ECM (for 1KD-FTV, for i-ART) |

Disconnect the E26, E31 and E32 ECM connectors.
Measure the voltage and resistance according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E32-23 (BATT) - E26-6 (E1) | L - BR | Battery | Always | 11 to 14 V |
| E31-24 (IGSW) - E26-6 (E1) | B-O - BR | IG power supply | Ignition switch ON | 11 to 14 V |
| E31-24 (IGSW) - E26-6 (E1) | B-O - BR | IG power supply | Ignition switch off | Below 1 V |
| E26-6 (E1) - Body ground | BR - Body ground | Ground | Always | Below 1 Ω |
Reconnect the E26, E31 and E32 ECM connectors.
Measure the voltage according to the value(s) in the table below.
| Terminal No. (Symbol) | Wiring Color | Terminal Description | Condition | Specified Condition |
| E32-8 (STP) - E26-6 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal released | Below 1 V |
| E32-8 (STP) - E26-6 (E1) | G-W - BR | Stop light switch input signal | Ignition switch ON Brake pedal depressed | 11 to 14 V |
| E32-9 (ST1-) - E26-6 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal depressed | Below 1 V |
| E32-9 (ST1-) - E26-6 (E1) | R-L - BR | Cruise cancel input signal | Ignition switch ON Brake pedal released | 11 to 14 V |
| E32-14 (CCS) - E26-6 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON | 11 to 14 V |
| E32-14 (CCS) - E26-6 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON CANCEL switch held on | 6.6 to 10.1 V |
| E32-14 (CCS) - E26-6 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON -SET switch held on | 4.5 to 7.1 V |
| E32-14 (CCS) - E26-6 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON +RES switch held on | 2.3 to 4.0 V |
| E32-14 (CCS) - E26-6 (E1) | G-W - BR | Cruise control main switch signal | Ignition switch ON Main switch on | Below 1 V |
| E31-34 (PI) - E26-6 (E1) | L-B - BR | Cruise main indicator light input signal | Ignition switch ON Main switch on | Below 1 V |
| E31-34 (PI) - E26-6 (E1) | L-B - BR | Cruise control main switch signal | Ignition switch ON Main switch off | 11 to 14 V |
| E31-23 (TC) - E26-6 (E1) | P-B - BR | Terminal TC of DLC3 | Ignition switch ON | 9 to 14 V |