Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Panel Switches do not Function

for Preparation Click here


INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.

1.CHECK PANEL SWITCH
  1. Check for foreign matter around the switches that might prevent operation.

    OK:
    No foreign matter is found.



NG
REMOVE ANY FOREIGN MATTER FOUND
OK


2.CHECK PANEL SWITCH


    E219355
  1. Enter the "Function Check/Setting I" and select "Panel & Steering Switch" (Click here).

  1. Operate the abnormal switch and check if the number of switches pushed and the switch status are correctly displayed.

    OK:
    The number of switches pushed and the switch status are correctly displayed as operated.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)