Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Display does not Dim when Light Control Switch is Turned ON

for Preparation Click here


INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.

1.CHECK VEHICLE SIGNAL


    C240231
  1. Enter the "Function Check/Setting I" and select "Vehicle Signal" (Click here).

  1. Check that the display for "TAIL" changes between ON and OFF according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display
    TAIL or HEAD
    ON
    OFF
    OFF

  1. Check that the display for "ADIM/TCAN" changes between DIM and BRIGHT according to the light control switch operation.

    OK:
    Light Control Switch Condition
    Display
    TAIL or HEAD
    DIM
    OFF
    BRIGHT

    HINT:
    The display is updated once per second. As a result, it is normal for the display to lag behind the actual switch operation.



NG
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)