Home › BODY ELECTRICAL › NAVIGATION › NAVIGATION SYSTEM

NAVIGATION SYSTEM > Vehicle Position Mark is not Updated


INSPECTION PROCEDURE

1.CHECK GPS MARK


    E237861E01
  1. Check that the GPS mark is displayed.

    OK:
    GPS mark is displayed.



NG
GO TO "GPS MARK IS NOT DISPLAYED" IN PROBLEM SYMPTOMS TABLE (Click here)
OK


2.CHECK VEHICLE SENSOR


    E234527E02
  1. Display the "Connection Status" screen (Click here).

  1. While driving the vehicle, check that the value and gauge change in response to changes in vehicle speed.

    OK:
    The value and gauge change in response to changes in vehicle speed.



NG
GO TO METER / GAUGE SYSTEM (Click here)
OK


3.CHECK VEHICLE SENSOR


    E234527E03
  1. Display the "Connection Status" screen (Click here).

  1. Check that the display changes between High and Low according to the shift lever operation.

    OK:
    Shift Lever Position
    Display
    Not reverse
    Low
    Reverse
    High

    HINT:
    The display is updated once per second. It is normal for the display to lag behind the actual switch operation.



NG
GO TO REVERSE SIGNAL CIRCUIT (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)