Home › BODY ELECTRICAL › AUDIO / VISUAL › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Screen Flicker or Color Distortion

for Preparation Click here


INSPECTION PROCEDURE

HINT:
For vehicles equipped with an Extension Module, refer to optional equipment's manuals.

1.CHECK DISPLAY SETTING
  1. Press the "SETUP" switch and select the "Display" button.



  1. Select the "General" and enter the "Display (General)" screen.


    E222318E01


    Text in Illustration 
    *a
    Example
    -
    -

  1. Reset the display settings (contrast and brightness) and check that the screen appears normal.

    OK:
    The display returns to normal.



NG
Go to step 2
OK

END 

2.CHECK CABIN TEMPERATURE
  1. Check that the cabin temperature is higher than -20°C (-4.0°F).

    OK:
    The cabin temperature is higher than -20°C (-4.0°F).



NG
HEAT CABIN AND RECHECK TEMPERATURE
OK


3.CHECK COLOR BAR


    E222015
  1. Enter the "Color Bar Check Mode" screen (Click here).

  1. Check that the color bars match the displayed names.

    OK:
    Color bars match the displayed names.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)