STARTER (for 1.7 kW Type) > INSTALLATION |
| 1. INSTALL STARTER ASSEMBLY |
![]() |
Install the starter with the 2 bolts.
Install the starter wire to terminal 30 with the nut.
Attach the terminal cap.
Connect the starter connector.
| 2. INSTALL TRANSMISSION OIL FILLER TUBE SUB-ASSEMBLY |
Coat a new O-ring with ATF and install it to the transmission oil filler tube.
Install the transmission oil filler tube with the 2 bolts.
Install the transmission oil level dipstick.
| 3. CONNECT CLUTCH RELEASE CYLINDER ASSEMBLY |
![]() |
Install the release cylinder with the 2 bolts.
| 4. REMOVE FRONT FENDER SEAL |
Install the seal with the 5 clips.
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |