Home › ENGINE ยท 2TR-FE › IGNITION › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > INSTALLATION

for Preparation Click here



1. INSTALL SPARK PLUG
  1. Using a 16 mm spark plug wrench, install the 4 spark plugs.

    Torque:
    18 N*m{ 184 kgf*cm , 13 ft.*lbf }



2. INSTALL IGNITION COIL ASSEMBLY
  1. Install the 4 ignition coils with the 4 bolts.

    Torque:
    9.0 N*m{ 92 kgf*cm , 80 in.*lbf }

  1. Connect the 4 ignition coil connectors.



3. INSTALL INTAKE AIR CONNECTOR
  1. Install the intake air connector with the 2 bolts, and then tighten the 2 hose clamps.

    Torque:
    for bolt:
    8.0 N*m{ 82 kgf*cm , 71 in.*lbf }
    for hose clamp on throttle body side:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }
    for hose clamp on air cleaner side:
    4.0 N*m{ 41 kgf*cm , 35 in.*lbf }

  1. Connect the No. 2 PCV hose.

  1. Connect the vacuum hose.