UPPER INSTRUMENT PANEL > DISASSEMBLY |
| 1. REMOVE METER MOUNTING BRACKET |
![]() |
Remove the screw <B> and meter mounting bracket.
| 2. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY |
![]() |
Detach the 4 claws and remove the No. 2 instrument panel register.
| 3. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY |
| 4. REMOVE INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY |
![]() |
Remove the 3 screws <B> and instrument panel cup holder.
| 5. REMOVE NO. 4 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 4 instrument panel cushion.
| 6. REMOVE NO. 3 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 3 instrument panel cushion.
| 7. REMOVE NO. 2 INSTRUMENT PANEL CUSHION |
![]() |
Remove the No. 2 instrument panel cushion.
| 8. REMOVE AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System) |
![]() |
Detach the 2 claws and remove the automatic light control sensor.
| 9. REMOVE LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System) |
![]() |
Detach the 2 claws and guide and remove the light control switch hole cover.
| 10. REMOVE COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System) |
![]() |
Put protective tape around the cooler thermistor (solar sensor).
Using a screwdriver, detach the 2 claws and remove the cooler thermistor (solar sensor).
Disconnect the connector.
| *1 | Protective Tape |
| *2 | Cooler Thermistor (Solar Sensor) |