Home › BODY › INSTRUMENT PANEL › UPPER INSTRUMENT PANEL

UPPER INSTRUMENT PANEL > REASSEMBLY

for Preparation Click here



1. INSTALL COOLER (SOLAR SENSOR) THERMISTOR (for Automatic Air Conditioning System)
  1. Connect the connector.

  1. Attach the 2 claws to install the cooler thermistor (solar sensor).



2. INSTALL LIGHT CONTROL SWITCH HOLE COVER (w/ Automatic Light Control System)
  1. Attach the guide and 2 claws to install the light control switch hole cover.



3. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (w/ Automatic Light Control System)
  1. Attach the 2 claws to install the automatic light control sensor.



4. INSTALL NO. 2 INSTRUMENT PANEL CUSHION


B278067
  1. Clean the instrument panel surface.

  1. Align a new No. 2 instrument panel cushion with the markings on the upper instrument panel and install the No. 2 instrument panel cushion to the position shown in the illustration using double-sided tape.



5. INSTALL NO. 3 INSTRUMENT PANEL CUSHION


B206460
  1. Clean the instrument panel surface.

  1. Align a new No. 3 instrument panel cushion with the markings on the upper instrument panel and install the No. 3 instrument panel cushion to the position shown in the illustration using double-sided tape.



6. INSTALL NO. 4 INSTRUMENT PANEL CUSHION


B206458
  1. Clean the instrument panel surface.

  1. Align a new No. 4 instrument panel cushion with the markings on the upper instrument panel and install the No. 4 instrument panel cushion to the position shown in the illustration using double-sided tape.



7. INSTALL INSTRUMENT PANEL CUP HOLDER SUB-ASSEMBLY

HINT:
Use the same procedure for both instrument panel cup holders.

  1. Install the instrument panel cup holder with the 3 screws <B>.



8. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY
  1. Attach the 4 claws to install the No. 2 instrument panel register.



9. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY

HINT:
Use the same procedure described for the No. 2 instrument panel register.



10. INSTALL METER MOUNTING BRACKET
  1. Install the meter mounting bracket with the screw <B>.