Terminal No. (Symbol)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
E24-17 (BATT) - E23-5 (E1)
| L - BR
| Battery (for measuring battery voltage and for ECM memory)
| Always
| 11 to 14 V
|
E24-22 (+BM) - E23-5 (E1)
| R-W - BR
| Power source of throttle actuator
| Always
| 11 to 14 V
|
E25-22 (IGSW) - E23-5 (E1)
| B-O - BR
| Ignition switch
| Ignition switch ON
| 11 to 14 V
|
E24-23 (+B) - E23-5 (E1)
| B - BR
| Power source of ECM
| Ignition switch ON
| 11 to 14 V
|
E25-12 (MREL) - E23-5 (E1)
| W-G - BR
| MAIN relay
| Ignition switch ON
| 11 to 14 V
|
E20-10 (VCTA) - E20-9 (ETA)
| Y - BR
| Power source of sensor (specific voltage)
| Ignition switch ON
| 4.5 to 5.0 V
|
E20-3 (VTA1) - E20-9 (ETA)
| B-R - BR
| Throttle position sensor (for engine control)
| Ignition switch ON, accelerator pedal fully released
| 0.5 to 1.1 V
|
E20-3 (VTA1) - E20-9 (ETA)
| B-R - BR
| Throttle position sensor (for engine control)
| Ignition switch ON, accelerator pedal fully depressed
| 3.2 to 4.8 V
|
E20-4 (VTA2) - E20-9 (ETA)
| LG - BR
| Throttle position sensor (for sensor malfunction detection)
| Ignition switch ON, accelerator pedal fully released
| 2.1 to 3.1 V
|
E20-4 (VTA2) - E20-9 (ETA)
| LG - BR
| Throttle position sensor (for sensor malfunction detection)
| Ignition switch ON, accelerator pedal fully depressed
| 4.6 to 5.0 V
|
E25-6 (VPA) - E25-2 (EPA)
| W-L - BR-W
| Accelerator pedal position sensor (for engine control)
| Ignition switch ON, accelerator pedal fully released
| 0.5 to 1.1 V
|
E25-6 (VPA) - E25-2 (EPA)
| W-L - BR-W
| Accelerator pedal position sensor (for engine control)
| Ignition switch ON, accelerator pedal fully depressed
| 2.6 to 4.5 V
|
E25-5 (VPA2) - E25-1 (EPA2)
| GR-G - BR-Y
| Accelerator pedal position sensor (for sensor malfunction detection)
| Ignition switch ON, accelerator pedal fully released
| 1.2 to 2.0 V
|
E25-5 (VPA2) - E25-1 (EPA2)
| GR-G - BR-Y
| Accelerator pedal position sensor (for sensor malfunction detection)
| Ignition switch ON, accelerator pedal fully depressed
| 3.4 to 5.0 V
|
E25-4 (VCPA) - E25-2 (EPA)
| LG-R - BR
| Power source of accelerator pedal position sensor (for VPA)
| Ignition switch ON
| 4.5 to 5.0 V
|
E25-3 (VCP2) - E25-1 (EPA2)
| BR-R - BR
| Power source of accelerator pedal position sensor (for VPA2)
| Ignition switch ON
| 4.5 to 5.0 V
|
E20-13 (VG) - E20-7 (E2G)
| L-W - L-R
| Mass air flow meter
| Idling, shift lever in P or N (for A/T) or neutral (for M/T), A/C switch off
| 0.5 to 3.0 V
|
E20-12 (THA) - E20-11 (ETHA)
| L-B - BR
| Intake air temperature sensor
| Idling, intake air temperature 20°C (68°F)
| 0.5 to 3.4 V
|
E20-18 (THW) - E20-17 (ETHW)
| B - BR
| Engine coolant temperature sensor
| Idling, engine coolant temperature 80°C (176°F)
| 0.2 to 1.0 V
|
E23-6 (#10) - E23-11 (E01)
| L - W-B
| Fuel injector assembly
| Ignition switch ON
| 11 to 14 V
|
E23-7 (#20) - E23-11 (E01)
| G - W-B
| Fuel injector assembly
| Ignition switch ON
| 11 to 14 V
|
E23-8 (#30) - E23-11 (E01)
| R - W-B
| Fuel injector assembly
| Ignition switch ON
| 11 to 14 V
|
E23-9 (#40) - E23-11 (E01)
| W - W-B
| Fuel injector assembly
| Ignition switch ON
| 11 to 14 V
|
E23-6 (#10) - E23-11 (E01)
| L - W-B
| Fuel injector assembly
| Idling
| Pulse generation (See waveform 1)
|
E23-7 (#20) - E23-11 (E01)
| G - W-B
| Fuel injector assembly
| Idling
| Pulse generation (See waveform 1)
|
E23-8 (#30) - E23-11 (E01)
| R - W-B
| Fuel injector assembly
| Idling
| Pulse generation (See waveform 1)
|
E23-9 (#40) - E23-11 (E01)
| W - W-B
| Fuel injector assembly
| Idling
| Pulse generation (See waveform 1)
|
E23-1 (IGT1) - E23-5 (E1)
| R - BR
| Ignition coil assembly (ignition signal)
| Idling
| Pulse generation (See waveform 2)
|
E23-2 (IGT2) - E23-5 (E1)
| R-L - BR
| Ignition coil assembly (ignition signal)
| Idling
| Pulse generation (See waveform 2)
|
E23-3 (IGT3) - E23-5 (E1)
| G-B - BR
| Ignition coil assembly (ignition signal)
| Idling
| Pulse generation (See waveform 2)
|
E23-4 (IGT4) - E23-5 (E1)
| G - BR
| Ignition coil assembly (ignition signal)
| Idling
| Pulse generation (See waveform 2)
|
E23-10 (IGF1) - E23-5 (E1)
| G-R - BR
| Ignition coil assembly (ignition confirmation signal)
| Ignition switch ON
| 4.5 to 5.0 V
|
E23-10 (IGF1) - E23-5 (E1)
| G-R - BR
| Ignition coil assembly (ignition confirmation signal)
| Idling
| Pulse generation (See waveform 2)
|
E21-11 (G2) - E21-5 (NE-)
| R - G
| Camshaft position sensor
| Idling
| Pulse generation (See waveform 3)
|
E21-12 (NE+) - E21-5 (NE-)
| L - G
| Crankshaft position sensor
| Idling
| Pulse generation (See waveform 3)
|
E25-25 (FC) - E23-5 (E1)
| LG-B - BR
| Fuel pump control
| Ignition switch ON
| 11 to 14 V
|
E25-25 (FC) - E23-5 (E1)
| LG-B - BR
| Fuel pump control
| Idling
| Below 1.5 V
|
E25-11 (FFR) - E23-5 (E1)
| L - BR
| Sub tank fuel pump control
| Ignition switch ON
| 11 to 14 V
|
E24-18 (DSSV) - E23-5 (E1)
| G - BR
| Sub tank solenoid valve assembly (for fuel injection volume control)
| FFV relay ON
| 11 to 14 V
|
E24-1 (SSV) - E23-5 (E1)
| Y - BR
| Sub tank fuel cut solenoid valve assembly (for fuel cut control)
| FFV relay ON
| 11 to 14 V
|
E23-14 (M+) - E23-13 (ME01)
| B - W-B
| Throttle actuator
| Idling with warm engine
| Pulse generation (See waveform 4)
|
E23-15 (M-) - E23-13 (ME01)
| W - W-B
| Throttle actuator
| Idling with warm engine
| Pulse generation (See waveform 5)
|
E22-7 (A1A+) - E23-5 (E1)
| B - BR
| Air fuel ratio sensor
| Ignition switch ON
| 3.3 V*1
|
E22-1 (A1A-) - E23-5 (E1)
| W - BR
| Air fuel ratio sensor
| Ignition switch ON
| 3.0 V*1
|
E22-13 (OX1B) - E22-14 (EX1B)
| B - B-R
| Heated oxygen sensor
| Engine speed maintained at 2500 rpm for 2 minutes after warming up sensor
| Pulse generation (See waveform 6)
|
E22-6 (HA1A) - E22-23 (E04)
| Y - W-B
| Air fuel ratio sensor
| Idling
| Pulse generation (See waveform 7)
|
E22-6 (HA1A) - E22-23 (E04)
| Y - W-B
| Air fuel ratio sensor
| Ignition switch ON
| 11 to 14 V
|
E22-18 (HT1B) - E22-14 (EX1B)
| L-Y - B-R
| Heated oxygen sensor heater
| Idling
| Below 3.0 V
|
E22-18 (HT1B) - E22-14 (EX1B)
| L-Y - B-R
| Heated oxygen sensor heater
| Ignition switch ON
| 11 to 14 V
|
E20-6 (KNK1) - E20-5 (EKNK)
| B - W
| Knock sensor
| Maintain Engine speed maintained at 4000 rpm after warming up engine
| Pulse generation (See waveform 8)
|
E21-14 (OC1+) - E21-9 (OC1-)
| P-L - Y
| Camshaft timing oil control valve assembly
| Idling
| Pulse generation (See waveform 9)
|
E22-19 (PRG) - E23-5 (E1)
| L - BR
| Purge VSV
| Ignition switch ON
| 11 to 14 V
|
E22-19 (PRG) - E23-5 (E1)
| L - BR
| Purge VSV
| Idling
| Pulse generation (See waveform 10)
|
E25-8 (STA) - E23-5 (E1)
| L-Y - BR*3 B-Y - BR*2
| Starter signal
| Shift lever in N (for A/T) or neutral (M/T), ignition switch START
| 5.5 V or higher
|
E25-18 (STP) - E23-5 (E1)
| G-W - BR
| Stop light switch
| Brake pedal depressed
| 7.5 to 14 V
|
E25-18 (STP) - E23-5 (E1)
| G-W - BR
| Stop light switch
| Brake pedal released
| Below 1.5 V
|
E24-8 (ST1-) - E23-5 (E1)
| R-L - BR
| Stop light switch
| Ignition switch ON, brake pedal depressed
| Below 1.5 V
|
E24-8 (ST1-) - E23-5 (E1)
| R-L - BR
| Stop light switch
| Ignition switch ON, brake pedal released
| 7.5 to 14 V
|
E24-13 (W) - E23-5 (E1)
| R-B - BR
| MIL
| Idling
| 11 to 14 V
|
E24-13 (W) - E23-5 (E1)
| R-B - BR
| MIL
| Ignition switch ON
| Below 3.5 V
|
E20-19 (ALT) - E23-5 (E1)
| G - BR
| Generator
| Ignition switch ON
| 11 to 14 V
|
E24-5 (ELS) - E23-5 (E1)
| G - BR
| Electric load
| Taillight switch on
| 7.5 to 14 V
|
E24-5 (ELS) - E23-5 (E1)
| G - BR
| Electric load
| Taillight switch off
| Below 1.5 V
|
E24-10 (ELS3) - E23-5 (E1)
| B - BR
| Electric load
| Rear window defogger switch on
| 7.5 to 14 V
|
E24-10 (ELS3) - E23-5 (E1)
| B - BR
| Electric load
| Rear window defogger switch off
| Below 1.5 V
|
E25-29 (TACH) - E23-5 (E1)
| B-W - BR
| Engine speed
| Idling
| Pulse generation (See waveform 11)
|
E25-16 (SPD) - E23-5 (E1)
| V-R - BR
| Speed signal from combination meter
| Driving at 20 km/h (12 mph)
| Pulse generation (See waveform 12)
|
E25-13 (TC) - E23-5 (E1)
| P-B - BR
| Terminal TC of DLC3
| Ignition switch ON
| 11 to 14 V
|
E24-3 (PSW) - E23-5 (E1)
| G-Y - BR
| Power steering oil pressure switch
| Steering wheel turning
| Below 1.5 V
|
E25-24 (NSW) - E23-5 (E1)*2
| L-Y - BR
| Park/Neutral switch signal
| Ignition switch ON and shift lever in P or N
| Below 1 V
|
E25-24 (NSW) - E23-5 (E1)*2
| L-Y - BR
| Park/Neutral switch signal
| Ignition switch ON and shift lever not in P or N
| 11 to 14 V
|
E25-34 (CANH) - E23-5 (E1)
| B - BR
| Signal for communication with other components
| Ignition switch ON
| Pulse generation (See waveform 13)
|
E25-33 (CANL) - E23-5 (E1)
| W - BR
| Signal for communication with other components
| Ignition switch ON
| Pulse generation (See waveform 14)
|
E24-6 (AIRV) - E23-5 (E1)
| V - BR
| Air switching valve for secondary air injection system
| Ignition switch ON
| 11 to 14 V
|
E24-19 (AIRP) - E23-5 (E1)
| W-L - BR
| Air pump control
| Ignition switch ON
| 11 to 14 V
|
E25-30 (AIDI) - E23-5 (E1)
| G-W - BR
| Diagnostic information signal for air injection system
| Air injection system operating
| Pulse generation (See waveform 15)
|
E23-11 (E01) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
E23-12 (E02) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
E22-12 (E03) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
E22-23 (E04) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
E23-5 (E1) - Body ground
| BR
| Ground
| Always
| Below 1 Ω
|
E24-11 (EC) - Body ground
| R
| Ground
| Always
| Below 1 Ω
|
E23-13 (ME01) - Body ground
| W-B
| Ground
| Always
| Below 1 Ω
|
E22-24 (GE01) - Body ground
| BR
| Ground
| Always
| Below 1 Ω
|