Home › ENGINE ยท 2TR-FE › ENGINE CONTROL SYSTEM › MASS AIR FLOW METER

MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL


3. REMOVE MASS AIR FLOW METER


    A111694
  1. Disconnect the MAF meter connector.

  1. Remove the 2 screws and MAF meter.

  1. Remove the O-ring from the MAF meter.