Home › ENGINE ยท 2TR-FBE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL ROD

ACCELERATOR PEDAL ROD > INSTALLATION

for Preparation Click here



1. INSTALL ACCELERATOR PEDAL ROD ASSEMBLY
  1. Install the accelerator pedal rod with the 2 bolts.

    Torque:
    5.0 N*m{ 51 kgf*cm , 44 in.*lbf }

    NOTICE:
    Do not apply oil or lubricant to the accelerator pedal rod assembly. If it is applied, the accelerator pedal rod assembly may not move smoothly.

  1. Connect the accelerator pedal position sensor connector.