Home › ENGINE ยท 2TR-FBE › ENGINE CONTROL SYSTEM › ACCELERATOR PEDAL ROD

ACCELERATOR PEDAL ROD > REMOVAL

for Preparation Click here



1. REMOVE ACCELERATOR PEDAL ROD ASSEMBLY


    A099092E01
  1. Disconnect the accelerator pedal position sensor connector.

  1. Remove the 2 bolts and accelerator pedal rod.

    NOTICE:
    1. Do not drop or strike the accelerator pedal rod.
    2. Do not disassemble the accelerator pedal rod.
    3. This accelerator pedal does not require lubrication.
      Do not apply oil or other lubrication to the accelerator pedal rod.
      If applied, the accelerator pedal rod must be replaced.