THROTTLE BODY > REMOVAL |
| 1. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the cylinder block drain cock plug and radiator drain cock plug to drain the coolant.

| 2. REMOVE INTAKE AIR CONNECTOR |
Disconnect the No. 2 ventilation hose.
Disconnect the vacuum hose.
Loosen the 2 hose clamps and remove the 2 bolts and disconnect the intake air connector.
| 3. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY |
Disconnect the throttle position sensor and control motor connector.
Disconnect the 2 water by-pass hoses.
![]() |
Remove the 2 bolts, 2 nuts and throttle body with motor.
Remove the gasket from the intake manifold.