Symbols (Terminal No.)
| Wiring Color
| Terminal Description
| Condition
| Specified Condition
|
NSW (E8-30) - E1 (E11-3)
| L-Y - BR
| Park/neutral position switch signal
| Ignition switch ON and shift lever on P or N
| Below 3 V
|
NSW (E8-30) - E1 (E11-3)
| L-Y - BR
| Park/neutral position switch signal
| Ignition switch ON and shift lever not on P or N
| 11 to 14 V
|
STA (E8-12) - E1 (E11-3)
| B-Y - BR
| Starter signal
| Cranking
| 6 V or higher
|
R (E9-11) - E1 (E11-3)
| R-Y - BR
| R shift position switch signal
| Ignition switch ON and transfer shift lever on R
| 11 to 14 V
|
R (E9-11) - E1 (E11-3)
| R-Y - BR
| R shift position switch signal
| Ignition switch ON and transfer shift lever not on R
| Below 1.5 V
|
L (E9-9) - E1 (E11-3)
| G-R - BR
| L shift position switch signal
| Ignition switch ON and transfer shift lever on L
| 11 to 14 V
|
L (E9-9) - E1 (E11-3)
| G-R - BR
| L shift position switch signal
| Ignition switch ON and transfer shift lever not on L
| Below 1.5 V
|
2 (E9-10) - E1 (E11-3)
| L - BR
| 2 shift position switch signal
| Ignition switch ON and transfer shift lever on 2
| 11 to 14 V
|
2 (E9-10) - E1 (E11-3)
| L - BR
| 2 shift position switch signal
| Ignition switch ON and transfer shift lever not on 2
| Below 1.5 V
|
3 (E9-19) - E1 (E11-3)
| G-O - BR
| 3 shift position switch signal
| Ignition switch ON and transfer shift lever on 3
| 11 to 14 V
|
3 (E9-19) - E1 (E11-3)
| G-O - BR
| 3 shift position switch signal
| Ignition switch ON and transfer shift lever not on 3
| Below 1.5 V
|
S1 (E10-9) - E1 (E11-3)
| B-W - BR
| S1 solenoid signal
| Ignition switch ON
| 11 to 14 V
|
S1 (E10-9) - E1 (E11-3)
| B-W - BR
| S1 solenoid signal
| 1st or 2nd gear
| 11 to 14 V
|
S1 (E10-9) - E1 (E11-3)
| B-W - BR
| S1 solenoid signal
| 3rd or 4th gear
| Below 1.5 V
|
S2 (E10-8) - E1 (E11-3)
| B-R - BR
| S2 solenoid signal
| Ignition switch ON
| Below 1.5 V
|
S2 (E10-8) - E1 (E11-3)
| B-R - BR
| S2 solenoid signal
| 2nd or 3rd gear
| 11 to 14 V
|
S2 (E10-8) - E1 (E11-3)
| B-R - BR
| S2 solenoid signal
| 1st or 4th gear
| Below 1.5 V
|
SL (E10-11) - E1 (E11-3)
| L-Y - BR
| SL solenoid signal
| Vehicle speed 65 km/h (40 mph), lock-up (ON to OFF)
| Pulse generation (see waveform 1)
|
SL (E10-11) - E1 (E11-3)
| L-Y - BR
| SL solenoid signal
| Vehicle driving under lock-up condition
| 11 to 14 V
|
SLT+ (E10-12) - SLT- (E10-13)
| B-L - B-Y
| SLT solenoid signal
| Ignition switch ON
| Below 3 V
|
SLT+ (E10-12) - SLT- (E10-13)
| B-L - B-Y
| SLT solenoid signal
| Engine is idling
| Pulse generation (see waveform 2)
|
STP (E9-4) - E1 (E11-3)
| G-W - BR
| Stop light switch signal
| Ignition switch ON and brake pedal is depressed
| 7.5 to 14 V
|
STP (E9-4) - E1 (E11-3)
| G-W - BR
| Stop light switch signal
| Ignition switch ON and brake pedal is released
| Below 1.5 V
|
SPD (E9-8) - E1 (E11-3)
| V-R - BR
| Speed signal
| Vehicle speed 20 km/h (12 mph)
| Pulse generation (see waveform 3)
|
SP2+ (E10-35) - SP2- (E10-27)
| G - R
| Speed sensor (SP2) signal
| Vehicle speed 20 km/h (12 mph)
| Pulse generation (see waveform 4)
|
NC0+ (E10-34) - NC0- (E10-26)
| V - P
| Speed sensor (NC0) signal
| Engine is idling
| Pulse generation (see waveform 5)
|
THOC (E11-22) - E2 (E11-28)
| W-L - BR
| ATF temperature sensor signal
| ATF temperature: 115°C (239°F) or more
| Below 1.5 V
|
SIL (E9-13) - E1 (E11-3)
| R-Y - BR
| Terminal SIL of DLC3
| Connect intelligent tester to DLC3
| Pulse generation
|
WFSE (E9-35) - E1 (E11-3)
| W - BR
| Terminal SIL of DLC3
| Ignition switch ON
| 11 to 14 V
|