Inspection
| Procedure
|
Transmission Control Switch (Shift Lock Control ECU) Test
| With the vehicle stationary and the shift lever in D, move the shift lever to 3 and return it to D. Check that the meter display changes from D to the appropriate 3 range and then back again.
|
D Position Shift Test
| While driving the vehicle normally, check that the transmission shifts up and down through each gear properly.
|
Lock-up Function
| While driving on a level surface at a constant speed in the lock-up range (80 km/h (50 mph) or more) with the shift lever in D, lightly depress the accelerator pedal and check that the engine speed does not change abruptly.
|
P Position Test
| Stop the vehicle on an incline (approximately 5° or more). Then move the shift lever to P and release the parking brake. Check that the parking lock pawl holds the vehicle in place.
|
Abnormal Noise and Vibration
| Check for abnormal noise and vibration while driving the vehicle forward and backward, and during shift operations.
|
Fluid Leakage
| After performing all other road test inspections, check for fluid leakage.
|