AUTOMATIC TRANSMISSION SYSTEM (for 1KD-FTV with i-ART) > MANUAL SHIFTING TEST |
| MANUAL SHIFTING TEST |
![]() |
Disconnect the connector of the transmission wire.
Drive with the transmission wire disconnected. Move the shift lever to each position and check whether the gear position changes as shown in the table below.
| Shift Lever Position | Gear Position |
| P | P |
| R | R |
| D | 4th |
| 4 | 4th |
| 3 | 3rd |
| 2 | 1st |
| L | 1st |
Connect the connector of the transmission wire.
Clear the DTCs (Click here).