Home › ENGINE ยท 2TR-FBE › ENGINE CONTROL SYSTEM › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
  1. Connect the intelligent tester to the DLC3.

  1. Start and warm up the engine.

  1. Enter the following menus: Powertrain / Engine and ECT / Active Test / Activate the VVT System (Bank 1).

  1. Operate the camshaft timing oil control valve using the intelligent tester, and then check the engine speed.

    OK:
    Condition
    Specified Condition
    Camshaft Timing Oil Control Valve OFF
    Normal engine speed
    Camshaft Timing Oil Control Valve ON
    Engine idles roughly or stalls soon after camshaft timing oil control valve switched from OFF to ON

    If the result is not as specified, check the camshaft timing oil control valve, wiring and ECM.