VVT SENSOR > REMOVAL |
| 1. REMOVE PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. DRAIN ENGINE COOLANT |
Remove the radiator cap.
Loosen the 2 cylinder block drain cock plugs and radiator drain cock plug, and then drain the coolant.

| 4. REMOVE V-BANK COVER |
![]() |
Remove the 2 nuts and V-bank cover.
| 5. REMOVE NO. 2 VENTILATION HOSE |
![]() |
| 6. REMOVE AIR CLEANER ASSEMBLY |
![]() |
Disconnect the vacuum hose.
Disconnect the MAF meter connector.
Remove the 2 wire harness clamps.
![]() |
Loosen the 2 hose clamps.
Remove the 2 bolts and air cleaner.
| 7. REMOVE VVT SENSOR (for Bank 1) |
![]() |
Disconnect the sensor connector.
Remove the bolt and sensor.
| 8. REMOVE VVT SENSOR (for Bank 2) |
![]() |
Disconnect the No. 4 and No. 5 water by-pass hoses.
Disconnect the sensor connector.
![]() |
Remove the bolt and sensor.