FUEL PUMP (for Fuel Main Tank) > INSTALLATION |
| 1. INSTALL FUEL PUMP FILTER |
Install a new fuel pump filter.
| 2. INSTALL FUEL SENDER GAUGE ASSEMBLY |
![]() |
Install the fuel sender gauge assembly by sliding it downward.
![]() |
Connect the connector of the fuel sender gauge assembly.
| 3. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY |
Apply a light coat of gasoline or grease to a new gasket, and install the gasket to the fuel tank.
Install the fuel suction with pump and gauge tube to the fuel tank.
| 4. INSTALL FUEL PUMP GAUGE RETAINER |
Set the fuel pump gauge retainer on the fuel tank. While holding the fuel suction with pump and gauge tube, tighten the retainer one complete turn by hand.
![]() |
Temporarily install SST (plate and 4 claws) to the fuel pump gauge retainer.
While pressing SST (claws) against the fuel pump gauge retainer ribs securely, install the 4 bolts.
Install SST (handle).
![]() |
Using SST, tighten the retainer until the mark on the retainer aligns with mark A on the fuel tank as shown in the illustration.
Install the fuel tank return tube and fuel tank main tube to the fuel tank.
Install the 2 fuel tank tubes with the 2 tube joint clips.
![]() |
| 5. INSTALL FUEL TANK ASSEMBLY |