Home › ENGINE · 2TR-FBE › FUEL › FUEL PUMP (for Fuel Main Tank)

FUEL PUMP (for Fuel Main Tank) > INSPECTION

for Preparation Click here



1. INSPECT FUEL PUMP


    G035143E03
  1. Check the fuel pump resistance.

    1. Using an ohmmeter, measure the resistance between terminals 4 and 5.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      4 - 5
      20°C (68°F)
      0.2 to 3.0 Ω

      If the result is not as specified, replace the fuel pump.

  1. Check fuel pump operation.

    1. Apply battery voltage to terminals 4 and 5. Check that the pump operates.

      NOTICE:
      1. This test must be completed within 10 seconds to prevent the coil from burning out.
      2. Keep the fuel pump as far away from the battery as possible.
      3. Always turn the voltage on and off at the battery, not the fuel pump.

      If the pump does not operate, replace the fuel pump.