Home › BODY ELECTRICAL › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM

WIRELESS DOOR LOCK CONTROL SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK THEFT WARNING ECU ASSEMBLY
B275963E03
  1. Disconnect the T33 theft warning ECU assembly connector.

  2. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    T33-1 (E) - Body ground
    B-W -Body ground
    Ground
    Always
    Below 1 Ω
    T33-4 (+B1) - Body ground
    L-Y B-W
    Battery power supply
    Always
    11 to 14 V
    T33-14 (+B2) - Body ground
    LG - B-W
    Battery power supply
    Always
    11 to 14 V
    T33-18 (IG) - Body ground
    R-L - B-W
    Ignition power supply
    Ignition switch off
    Below 1 V
    Ignition switch ON
    11 to 14 V

    1. If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the T33 theft warning ECU assembly connector.

  4. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    T33-3 (DMLP) - Body ground
    P - Body ground
    Interior lights output signal
    Interior lights on
    Below 1 V
    Interior lights off
    11 to 14 V
    T33-5 (KSW) - Body ground
    G-Y - Body ground
    Unlock warning switch input signal
    No key in ignition key cylinder
    10 kΩ or higher
    Key inserted in ignition key cylinder
    Below 1 Ω
    T33-7 (CTY) - Body ground
    R-L - Body ground
    All door courtesy switches input signal
    One or more doors are open
    Below 1 V
    All doors are closed
    11 to 14 V
    T33-13 (SH-) - Body ground
    B - Body ground
    Security horn output signal
    Security horn off
    Below 1 V
    Security horn on
    Pulse generation
    T33-25 (L2) - Body ground
    L - Body ground
    Door lock output signal
    Ignition switch off, all doors closed and transmitter switch not pressed
    Below 1 V
    Ignition switch off, all doors closed and transmitter lock switch pressed
    Pulse generation
    T33-26 (UL3) -Body ground
    L-W - Body ground
    Door unlock output signal
    Ignition switch off, all doors closed and transmitter switch not pressed
    Below 1 V
    Ignition switch off, all doors closed and transmitter unlock switch pressed
    Pulse generation
    T33-28 (HAZD) - Body ground
    G-O - Body ground
    All hazard warning light output signals
    Hazard warning signal switch assembly off
    11 to 14 V
    Hazard warning signal switch assembly on
    Below 1 V

    1. If the result is not as specified, the theft warning ECU assembly may have a malfunction.


CHECK INSTRUMENT PANEL JUNCTION BLOCK (INTEGRATION RELAY)

B123671E01

  1. Disconnect the 2D, 2H and 2L instrument panel junction block connectors.

  2. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    2D-9 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    2D-18 (GND) - Body ground
    W-B - Body ground
    Ground
    Always
    Below 1 Ω
    2H-4 (ALTB) - Body ground
    LG - Body ground
    Battery power supply
    Always
    11 to 14 V
    2L-12 (BECU) - Body ground
    L - Body ground
    Battery power supply
    Always
    11 to 14 V

    1. If the result is not as specified, there may be a malfunction on the wire harness side.

  3. Reconnect the D, 2H and 2L instrument panel junction block connectors.

  4. Measure the resistance and voltage according to the value(s) in the table below.

    Terminal No. (Symbol)
    Wiring Color
    Terminal Description
    Condition
    Specified Condition
    2A-4 (L1) - Body ground
    L - Body ground
    1. Power window regulator master switch assembly (door control switch) lock input signal
    2. Driver side door key-linked lock input signal
    1. Power window regulator master switch assembly (door control switch) locked
    2. Driver side door key cylinder in lock position
    Below 1 V
    1. Power window regulator master switch assembly (door control switch) off
    2. Ignition switch off, all doors closed and driver side door key cylinder in neutral position
    11 to 14 V
    2D-4 (UL1) - Body ground
    L-W - Body ground
    1. Power window regulator master switch assembly (door control switch) unlock input signal
    2. Driver side door key-linked unlock input signal
    1. Power window regulator master switch assembly (door control switch) unlocked
    2. Driver side door key cylinder in unlock position
    Below 1 V
    1. Power window regulator master switch assembly (door control switch) off
    2. Ignition switch off, all doors closed and driver side door key cylinder in neutral position
    11 to 14 V
    2K-10 (ACT-) - Body ground
    L-Y - Body ground
    Door lock motor unlock drive output signal (passenger door, rear RH door and back door)
    Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
    Below 1 V
    Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    2K-11 (ACT+) - Body ground
    L - Body ground
    Door lock motor lock drive output signal (passenger door, rear RH door and back door)
    Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
    Below 1 V
    Power window regulator master switch assembly (door control switch) or driver side door key cylinder in lock position
    11 to 14 V
    2O-27 (DCTY) - Body ground
    R-B - Body ground
    Front door courtesy light switch assembly LH input signal
    Driver side door open
    Below 1 V
    Driver side door closed
    11 to 14 V
    2R-27 (ACT-) - Body ground
    L-Y - Body ground
    Door lock motor unlock drive output signal (driver door and rear LH door)
    Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
    Below 1 V
    Lock side of power window regulator master switch assembly (door control switch) pushed, or driver side door key cylinder in unlock position
    11 to 14 V
    2R-28 (ACT+) - Body ground
    L - Body ground
    Door lock motor lock drive output signal (driver door and rear LH door)
    Power window regulator master switch assembly (door control switch) not pushed and driver side door key cylinder in neutral position
    Below 1 V
    Power window regulator master switch assembly (door control switch) or driver side door key cylinder in lock position
    11 to 14 V

    1. If the result is not as specified, the instrument panel junction blockmay have a malfunction.