FRONT SEAT ASSEMBLY (for Manual Seat) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (for Front Passenger Side, w/ Front Seat Side Airbag) |
| 3. REMOVE INNER SEAT TRACK BRACKET COVER LH |
Lift up the seat track handle sub-assembly LH and move the seat to the foremost position.
![]() |
Using a moulding remover, detach the 2 claws and remove the inner seat track bracket cover LH.
| 4. REMOVE SEAT TRACK COVER LH |
![]() |
Using a moulding remover, detach the 2 claws and remove the seat track cover LH.
| 5. REMOVE FRONT SEAT HEADREST ASSEMBLY |
Remove the front seat headrest assembly.
| 6. REMOVE FRONT SEAT ASSEMBLY |
![]() |
Remove the 2 bolts.
Lift up the seat track handle sub-assembly LH and move the seat to the rearmost position.
![]() |
Remove the 2 bolts.
Lift up the seat track handle sub-assembly LH and move the seat to the center position. Also, operate the reclining adjuster release handle LH and move the seatback to the upright position.
Disconnect the connector and detach the wire harness clamp from under the seat.
Remove the front seat assembly from the vehicle.