FRONT SEAT ASSEMBLY (for Manual Seat) > DISASSEMBLY |
| 1. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) |
![]() |
Detach the clamp.
![]() |
Detach the wire harness from the clamp.
Roll up the front seat cushion cover LH.
Remove the nut and front seat inner belt assembly LH.
Remove the front seat belt anchor plate.
| 2. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side) |
![]() |
w/ Passenger seat belt warning light:
Detach the 2 clamps.
w/ Passenger seat belt warning light:
Disconnect the connector.
![]() |
w/ Passenger seat belt warning light:
Detach the wire harness from the clamp.
Roll up the front seat cushion cover RH.
Remove the nut and front seat inner belt assembly RH.
Remove the front seat belt anchor plate.
| 3. REMOVE FRONT SEAT CUSHION COVER LH |
Remove the front seat cushion cover LH.
| 4. REMOVE FRONT SEAT INNER CUSHION SHIELD LH |
![]() |
Remove the 2 screws.
Detach the 2 hooks in the order shown in the illustration and remove the front seat inner cushion shield LH.
| 5. REMOVE VERTICAL SEAT ADJUSTER KNOB LH (for Driver Side) |
![]() |
Using a screwdriver, remove the snap ring as shown in the illustration.
| *1 | Protective Tape |
Remove the vertical seat adjuster knob LH.
| 6. REMOVE RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Raise the reclining adjuster release handle LH to reveal the claw. Using a screwdriver, detach the claw and remove the reclining adjuster release handle LH.
| *1 | Protective Tape |
| 7. REMOVE FRONT SEAT CUSHION SHIELD LH |
![]() |
Remove the 2 screws.
Detach the 2 hooks in the order shown in the illustration, and then detach the guide and remove the front seat cushion shield LH.
| *1 | Hook |
| *2 | Guide |
| 8. REMOVE SEATBACK SPRING LH |
![]() |
Remove the seatback spring LH.
| 9. REMOVE SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Front Passenger Side, w/ Front Seat Side Airbag) |
![]() |
Detach the 3 front seat airbag wire harness clamps.
![]() |
Remove the hog rings and fold back the separate type front seat cushion cover and the rubber bands of the separate type front seatback cover.
![]() |
Remove the 4 bolts and separate type front seatback assembly.
| 10. REMOVE SEPARATE TYPE FRONT SEATBACK COVER |
![]() |
Remove the 4 bolts and front seatback assembly.
![]() |
Remove the hog rings, and then roll up the separate type front seatback cover.
![]() |
for Front Passenger Side, w/ Front Seat Side Airbag:
Pass the front seat airbag wire harness through the hole of the separate type front seatback cover, and then roll up the separate type front seatback cover.
![]() |
Remove the hog rings and detach the 2 straps of the separate type front seatback cover, and then roll up the separate type front seatback cover.
![]() |
Pass the strap of the separate type front seatback cover through the holes of the separate type front seatback pad.
![]() |
for Front Passenger Side, w/ Front Seat Side Airbag:
Remove the nut and detach the separate type front seatback cover bracket.
Remove the hog rings and roll up the separate type front seatback cover.

| *A | except Sports Seat Type | *B | for Sports Seat Type |
| *a | Front view of front seatback | *b | Rear view of front seatback |
![]() |
Detach the 4 claws and remove the 2 front seat headrest support assemblies and separate type front seatback cover from the separate type front seatback pad.
| 11. REMOVE SEPARATE TYPE FRONT SEATBACK PAD |
![]() |
Remove the separate type front seatback pad from the separate type front seatback spring assembly.
| 12. REMOVE NO. 1 SEATBACK CLOTH (except Sport Seat Type, for TASA Made) |
![]() |
Remove the No. 1 seatback cloth from the separate type front seatback spring assembly.
| 13. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER |
![]() |
Remove the hog rings and fold back the separate type front seat cushion cover.
![]() |
for Front Passenger Side:
Detach the wire harness clamp.
![]() |
Remove the hog rings.
![]() |
Bend the 2 front seat cushion frame claws upward.
Detach the hooks and remove the separate type front seat cushion cover together with the pad from the front seat cushion frame sub-assembly LH.

Remove the hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.

| *A | except Sports Seat Type | *B | for Sports Seat Type |
| 14. REMOVE FRONT SEAT CUSHION PROTECTOR |
![]() |
Remove the 2 front seat cushion protectors.
| 15. REMOVE FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH |
![]() |
Remove the 4 bolts and front seat cushion frame sub-assembly LH.
| 16. REMOVE FRONT SEAT ADJUSTER ROD (for Driver Side) |
![]() |
Remove the 2 bolts and front seat adjuster rod.
| 17. REMOVE SEAT TRACK HANDLE SUB-ASSEMBLY LH |
![]() ![]() |
Using a screwdriver, detach the 2 springs and remove the seat track handle sub-assembly LH as shown in the illustration.
| 18. REMOVE SEAT SPRING (for Driver Side) |
Temporarily install the vertical seat adjuster knob LH.
Turn the vertical seat adjuster knob LH clockwise and move the lower reclining adjuster arm sub-assembly to the uppermost position.
Remove the vertical seat adjuster knob LH.
![]() |
Detach the seat spring from the lower reclining adjuster arm sub-assembly.
![]() |
Using a screwdriver, spread apart the tabs that hold the spring, and then remove the seat spring.
| 19. REMOVE FRONT NO. 2 SEAT ADJUSTER PIN LH (for Driver Side) |
![]() |
Using a 6 mm socket hexagon wrench, remove the front No. 2 seat adjuster pin LH.
| 20. REMOVE VERTICAL ADJUSTING SHAFT SUB-ASSEMBLY (for Driver Side) |
Temporarily install the vertical seat adjuster knob LH.
![]() |
Turn the vertical seat adjuster knob LH clockwise and move the gear of the vertical adjusting shaft sub-assembly to the position shown in the illustration.
Remove the vertical seat adjuster knob LH.
![]() |
Using a screwdriver, remove the 2 E-rings.
Disconnect the 2 vertical travel links from the vertical adjusting shaft sub-assembly.
| *1 | Vertical Travel Link |
![]() |
Disconnect the vertical adjusting shaft sub-assembly from the 2 lower reclining adjuster arms and remove the vertical adjusting shaft sub-assembly.
| 21. REMOVE LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY LH |
![]() |
for Driver Side:
Using a T40 "TORX" socket wrench, remove the 2 "TORX" bolts and lower reclining adjuster arm sub-assembly LH.
![]() |
for Front Passenger Side:
Remove the 3 bolts and lower reclining adjuster arm sub-assembly LH.
| 22. REMOVE LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY RH |
for Driver Side:
for Front Passenger Side:
| 23. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side) |
![]() |
Remove the front seat cushion edge protector LH.
| 24. REMOVE FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side) |