FRONT SEAT ASSEMBLY (for Manual Seat) > REASSEMBLY |
| 1. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR LH (for Driver Side) |
![]() |
Install the front seat cushion edge protector LH as shown in the illustration.
| 2. INSTALL FRONT SEAT CUSHION EDGE PROTECTOR RH (for Front Passenger Side) |
| 3. INSTALL LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY LH |
![]() |
for Driver Side:
Apply MP grease to the locations shown in the illustration.
![]() | MP Grease |
Using a T40 "TORX" socket wrench, install the lower reclining adjuster arm sub-assembly LH with the 2 "TORX" bolts.
for Front Passenger Side:
Install the lower reclining adjuster arm sub-assembly LH with the 3 bolts.
| 4. INSTALL LOWER RECLINING ADJUSTER ARM SUB-ASSEMBLY RH |
for Driver Side:
for Front Passenger Side:
| 5. INSTALL VERTICAL ADJUSTING SHAFT SUB-ASSEMBLY (for Driver Side) |
![]() |
Apply MP grease to the locations shown in the illustration.
![]() | MP Grease |
![]() |
Connect the vertical adjusting shaft sub-assembly to the 2 lower reclining adjuster arms to install it.
![]() |
Connect the 2 vertical travel links to the vertical adjusting shaft sub-assembly.
| *1 | Vertical Travel Link |
Install 2 new E-rings.
Temporarily install the vertical seat adjuster knob LH.
![]() |
Turn the vertical seat adjuster knob LH as much as possible in the direction indicated by arrow A in the illustration.
| *1 | Vertical Adjusting Shaft Sub-assembly |
| *2 | Lower Reclining Adjuster Arm Sub-assembly |
| *3 | Hole |
| *a | Arrow A |
| *b | Arrow B |
Mesh the gear of the vertical adjusting shaft sub-assembly with the gear of the lower reclining adjuster arm sub-assembly.
Align the holes of the vertical adjusting shaft sub-assembly and lower reclining adjuster arm sub-assembly by turning the vertical seat adjuster knob LH in the direction indicated by arrow B in the illustration.
Remove the vertical seat adjuster knob LH.
| 6. INSTALL FRONT NO. 2 SEAT ADJUSTER PIN LH (for Driver Side) |
Using a 6 mm socket hexagon wrench, install the front No. 2 seat adjuster pin LH.
| 7. INSTALL SEAT SPRING (for Driver Side) |
Temporarily install the vertical seat adjuster knob LH.
Turn the vertical seat adjuster knob LH clockwise and move the lower reclining adjuster arm sub-assembly to the uppermost position.
Remove the vertical seat adjuster knob LH.
![]() |
Install the seat spring as shown in the illustration.
Using pliers, push together the tabs that hold the seat spring.
| 8. INSTALL SEAT TRACK HANDLE SUB-ASSEMBLY LH |
![]() |
Apply MP grease to the locations shown in the illustration.
![]() | MP Grease |
![]() ![]() |
Attach the 2 springs to install the seat track handle sub-assembly LH as shown in the illustration.
| 9. INSTALL FRONT SEAT ADJUSTER ROD (for Driver Side) |
Install the front seat adjuster rod with the 2 bolts.
| 10. INSTALL FRONT SEAT CUSHION FRAME SUB-ASSEMBLY LH |
Install the front seat cushion frame sub-assembly LH with the 4 bolts.
| 11. INSTALL FRONT SEAT CUSHION PROTECTOR |
![]() |
Install the 2 front seat cushion protectors.
| 12. INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER |
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with new hog rings.

| *A | except Sports Seat Type | *B | for Sports Seat Type |
| *1 | Hog Ring Pliers | - | - |
Attach the hooks to install the separate type front seat cushion cover with pad to the front seat cushion frame sub-assembly LH.
![]() |
Bend the 2 front seat cushion frame claws downward.
![]() |
Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.
| *1 | Hog Ring Pliers |
![]() |
for Front Passenger Side:
Attach the wire harness clamp.
![]() |
Using hog ring pliers, attach the separate type front seat cushion cover to the front seat cushion frame sub-assembly LH with new hog rings.
| *1 | Hog Ring Pliers |
| 13. INSTALL NO. 1 SEATBACK CLOTH (except Sports Seat Type, for TASA Made) |
![]() |
Install the No. 1 seatback cloth to the separate type front seatback spring assembly.
| 14. INSTALL SEPARATE TYPE FRONT SEATBACK PAD |
![]() |
Install the separate type front seatback pad to the separate type front seatback spring assembly.
| 15. INSTALL SEPARATE TYPE FRONT SEATBACK COVER |
Using hog ring pliers, install the separate type front seatback cover to the separate type front seatback pad with new hog rings.

| *A | except Sports Seat Type | *B | for Sports Seat Type |
| *1 | Hog Ring Pliers | - | - |
| *a | Front view of front seatback | *b | Rear view of front seatback |
Attach the 4 claws to install the 2 front seat headrest support assemblies.
![]() |
for Front Passenger Side, w/ Front Seat Side Airbag:
Attach the separate type front seatback cover bracket and install the nut.
![]() |
Pass the straps of the separate type front seatback cover through the holes of the separate type front seatback pad.
![]() |
Using hog ring pliers, attach the 2 straps of the separate type front seatback cover to the separate type front seatback spring assembly with new hog rings.
| *1 | Hog Ring Pliers |
![]() |
for Front Passenger Side, w/ Front Seat Side Airbag:
Pass the front seat airbag wire harness through the hole of the separate type front seatback cover.
![]() |
Using hog ring pliers, attach the separate type front seatback cover with new hog rings.
| *1 | Hog Ring Pliers |
Install the front seatback assembly with the 4 bolts.
| 16. INSTALL SEPARATE TYPE FRONT SEATBACK ASSEMBLY (for Front Passenger Side, w/ Front Seat Side Airbag) |
![]() |
Using hog ring pliers, attach the separate type front seat cushion cover and the rubber bands of the separate type front seatback cover to the front seat cushion frame sub-assembly LH with new hog rings.
| *1 | Hog Ring Pliers |
Install the separate type front seatback assembly with the 4 bolts.
![]() |
Attach the 3 front seat airbag wire harness clamps.
| 17. INSTALL SEATBACK SPRING LH |
![]() |
Install the seatback spring LH.
| 18. INSTALL FRONT SEAT CUSHION SHIELD LH |
![]() |
Attach the guide and 2 hooks in the order shown in the illustration to install the front seat cushion shield LH.
| *1 | Guide |
| *2 | Hook |
Install the 2 screws.
| 19. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Attach the claw to install the reclining adjuster release handle LH.
| 20. INSTALL VERTICAL SEAT ADJUSTER KNOB LH (for Driver Side) |
![]() |
Install the snap ring to the vertical seat adjuster knob LH.
Install the vertical seat adjuster knob LH.
| 21. INSTALL FRONT SEAT INNER CUSHION SHIELD LH |
![]() |
Attach the 2 hooks in the order shown in the illustration to install the front seat inner cushion shield LH.
Install the 2 screws.
| 22. INSTALL FRONT SEAT CUSHION COVER LH |
Install the front seat cushion cover LH.
| 23. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) |
![]() |
Install the buckle cover on the seat belt.
![]() |
Install the seat belt with the nut.
Attach the wire harness to the clamp.
![]() |
Attach the clamp as shown in the illustration.
| 24. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side) |
![]() |
w/ Passenger seat belt warning light:
Attach the 2 clamps as shown in the illustration.
w/ Passenger seat belt warning light:
Connect the connector.
![]() |
Install the buckle cover on the inner belt.
![]() |
w/ Passenger seat belt warning light:
Attach the wire harness to the clamp.
Install the seat belt with the nut.