Home › DRIVE LINE › PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (except DANA Made)

PROPELLER SHAFT ASSEMBLY (except DANA Made) > INSTALLATION

for Preparation Click here



1. INSTALL REAR PROPELLER SHAFT ASSEMBLY


    C191272E01
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft and 4 washers with the 4 bolts and 4 nuts.

    Torque:
    88 N*m{ 897 kgf*cm , 65 ft.*lbf }



    C191273E01
  1. Align the matchmarks on the propeller shaft flange and transfer flange.

  1. Connect the propeller shaft and 4 washers with the 4 nuts.

    Torque:
    88 N*m{ 897 kgf*cm , 65 ft.*lbf }