Home › DRIVE LINE › PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (except DANA Made)

PROPELLER SHAFT ASSEMBLY (except DANA Made) > REMOVAL

for Preparation Click here



1. REMOVE REAR PROPELLER SHAFT ASSEMBLY


    C191273E01
  1. Place matchmarks on the propeller shaft flange and transfer flange.

  1. Remove the 4 nuts and 4 washers, and disconnect the propeller shaft.



    C191272E01
  1. Place matchmarks on the propeller shaft flange and differential flange.

  1. Remove the 4 nuts, 4 bolts and 4 washers.

  1. Remove the propeller shaft.